EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simulation of thoracic endovascular aortic repair in a perfused patient-specific model of type B aortic dissection

Lukas Mohl, Roger Karl, Matthias N Hagedorn, Armin Runz, Stephan Skornitzke, Malte Toelle, C Soeren Bergt, Johannes Hatzl, Christian Uhl, Dittmar Böckler, Katrin Meisenbacher, Sandy Engelhardt

International Journal of Computer Assisted Radiology and Surgery · 2024

DOI: 10.1007/s11548-024-03190-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Computer Assisted Radiology and Surgery, 2024. Verfasst von Lukas Mohl und 11 weiteren Autor:innen. Beteiligte Einrichtung: Department of Cardiac Surgery, Heidelberg University Hospital, Heidelberg, Germany. l.mohl@stud.uni-heidelberg.de. Hauptthemen laut MEDLINE: Aortic Dissection, Endovascular Procedures, Aortic Aneurysm, Thoracic, Aorta, Thoracic. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Heidelberger Stiftung Chirurgie, Universitätsklinikum Heidelberg.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

Complicated type B Aortic dissection is a severe aortic pathology that requires treatment through thoracic endovascular aortic repair (TEVAR). During TEVAR a stentgraft is deployed in the aortic lumen in order to restore blood flow. Due to the complicated pathology including an entry, a resulting dissection wall with potentially several re-entries, replicating this structure artificially has proven to be challenging thus far.

Methods

We developed a 3d printed, patient-specific and perfused aortic dissection phantom with a flexible dissection flap and all major branching vessels. The model was segmented from CTA images and fabricated out of a flexible material to mimic aortic wall tissue. It was placed in a pulsatile hemodynamic flow loop. Hemodynamics were investigated through pressure and flow measurements and doppler ultrasound imaging. Surgeons performed a TEVAR intervention including stentgraft deployment under fluoroscopic guidance.

Results

The flexible aortic dissection phantom was successfully incorporated in the hemodynamic flow loop, a systolic pressure of 112 mmHg and physiological flow of 4.05 L per minute was reached. Flow velocities were higher in true lumen with a up to 35.7 cm/s compared to the false lumen with a maximum of 13.3 cm/s, chaotic flow patterns were observed on main entry and reentry sights. A TEVAR procedure was successfully performed under fluoroscopy. The position of the stentgraft was confirmed using CTA imaging.

Conclusions

This perfused in-vitro phantom allows for detailed investigation of the complex inner hemodynamics of aortic dissections on a patient-specific level and enables the simulation of TEVAR procedures in a real endovascular operating environment. Therefore, it could provide a dynamic platform for future surgical training and research.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Aortic DissectionEndovascular ProceduresAortic Aneurysm, ThoracicAorta, ThoracicPatient-Specific ModelingHumansPhantoms, ImagingPrinting, Three-DimensionalStentsComputed Tomography AngiographyHemodynamicsBlood Vessel Prosthesis ImplantationEndovascular Aneurysm Repair

Stichwörter der Autor:innen

3d printingAortic dissectionHemodynamic aortic flow loopIn vitro phantomPatient-specific aortaTEVAR simulation

Autor:innen und Institutionen

  • Department of Cardiac Surgery, Heidelberg University Hospital, Heidelberg, Germany. l.mohl@stud.uni-heidelberg.de.
  • Department of Internal Medicine III, Department of Cardiology, Heidelberg University Hospital, Im Neuenheimer Feld 410, 69120, Heidelberg, Germany. l.mohl@stud.uni-heidelberg.de.
  • German Centre for Cardiovascular Research (DZHK), Partner Site Heidelberg/Mannheim, Heidelberg, Germany. l.mohl@stud.uni-heidelberg.de.
  • Department of Cardiac Surgery, Heidelberg University Hospital, Heidelberg, Germany.
  • Department of Internal Medicine III, Department of Cardiology, Heidelberg University Hospital, Im Neuenheimer Feld 410, 69120, Heidelberg, Germany.
  • German Centre for Cardiovascular Research (DZHK), Partner Site Heidelberg/Mannheim, Heidelberg, Germany.

Förderung

  • Heidelberger Stiftung Chirurgie
  • Universitätsklinikum Heidelberg

Zitieren

APA

Mohl, L., Karl, R., Hagedorn, M. N., Runz, A., Skornitzke, S., Toelle, M., Bergt, C. S., Hatzl, J., Uhl, C., Böckler, D., Meisenbacher, K., & Engelhardt, S. (2024). Simulation of thoracic endovascular aortic repair in a perfused patient-specific model of type B aortic dissection. International Journal of Computer Assisted Radiology and Surgery. https://doi.org/10.1007/s11548-024-03190-3

Vancouver

Mohl L, Karl R, Hagedorn MN, Runz A, Skornitzke S, Toelle M, et al. Simulation of thoracic endovascular aortic repair in a perfused patient-specific model of type B aortic dissection. International Journal of Computer Assisted Radiology and Surgery. 2024. doi:10.1007/s11548-024-03190-3

BibTeX
@article{Mohl2024,
  author = {Mohl, Lukas and Karl, Roger and Hagedorn, Matthias N and Runz, Armin and Skornitzke, Stephan and Toelle, Malte and Bergt, C Soeren and Hatzl, Johannes and Uhl, Christian and Böckler, Dittmar and Meisenbacher, Katrin and Engelhardt, Sandy},
  title = {Simulation of thoracic endovascular aortic repair in a perfused patient-specific model of type B aortic dissection},
  journal = {International Journal of Computer Assisted Radiology and Surgery},
  year = {2024},
  doi = {10.1007/s11548-024-03190-3}
}
Kostenlos starten →