Metal-Filled Porous Silicon for Plasmonic Light Trapping in Solar Cell Applications: A Comparative Finite Element Study of Ag, Au, and Cu
Plasmonics · 24.09.2026 · 21 (11) · 4047-4070
DOI: 10.1007/s11468-026-03476-z ↗Kurz gefasst
Fachartikel in der Zeitschrift Plasmonics, online erschienen am 24.09.2026. Verfasst von Muhammad Naseem Akhtar und 6 weiteren Autor:innen. Die Arbeit nennt 116 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Università degli Studi di Cagliari.
Abstract (Originalsprache)
Crystalline silicon (c-Si) solar cells currently dominate with commercial module efficiencies of 22–24% and laboratory records ~ 27% for single junction devices. These values are constrained by optical losses, including insufficient light trapping within the device architecture. In this study we report a finite element analysis (FEA), carried out in COMSOL Multiphysics RF Module (v.5.3a), of a one-dimensional porous silicon array (1D PSiA) with pores filled by silver (Ag), gold (Au), and copper (Cu) in a c-Si substrate, targeting enhanced light trapping through surface plasmon polaritons (SPPs) and localized surface plasmon resonance (LSPR). Pore width (w) was swept from 50 to 600 nm at a fixed periodicity (Λ) of 700 nm under transverse-magnetic (TM) illumination. Far-field transmission spectra reveal a Fano-resonance dip at 703–720 nm governed by the structural periodicity. Full-width at half-maximum (FWHM) and near-field electric-field norm (E-Norm) analysis identify w = 200 nm as the critical coupling width for Ag (E-Norm peak 0.0044 a.u.) and w = 200–250 nm for Au and Cu (0.0045 and 0.0040 a.u.). Coupling efficiencies (η) at w = 200 nm reach 97.2%, 96.4%, and 95.4% for Ag, Au, and Cu, respectively, saturating above 99% for w ≥ 250 nm; relative transmission (T rel ) peaks near 0.029 a.u. at w = 250 nm before declining sharply. A four-way correlation of FWHM, E-Norm, η, and T rel is consistent with the optimum pore widths correspond to roughly one-third of the structural periodicity, offering a computationally validated geometric design rule for pore-confined plasmonic solar cell fabrication.
Förderung
- Università degli Studi di Cagliari
Zitieren
APA
Akhtar, M. N., Iqbal, T., Ali, H., Gilani, M. A. N., Riasat, M., Jehangir, R., & Mula, G. (2026). Metal-Filled Porous Silicon for Plasmonic Light Trapping in Solar Cell Applications: A Comparative Finite Element Study of Ag, Au, and Cu. Plasmonics, 21(11), 4047-4070. https://doi.org/10.1007/s11468-026-03476-z
Vancouver
Akhtar MN, Iqbal T, Ali H, Gilani MAN, Riasat M, Jehangir R, et al. Metal-Filled Porous Silicon for Plasmonic Light Trapping in Solar Cell Applications: A Comparative Finite Element Study of Ag, Au, and Cu. Plasmonics. 2026;21(11):4047-4070. doi:10.1007/s11468-026-03476-z
BibTeX
@article{Akhtar2026,
author = {Akhtar, Muhammad Naseem and Iqbal, Tahir and Ali, Hamaad and Gilani, Muhammad Azhar Naeem and Riasat, Muhammad and Jehangir, Roha and Mula, Guido},
title = {Metal-Filled Porous Silicon for Plasmonic Light Trapping in Solar Cell Applications: A Comparative Finite Element Study of Ag, Au, and Cu},
journal = {Plasmonics},
year = {2026},
volume = {21},
number = {11},
pages = {4047--4070},
doi = {10.1007/s11468-026-03476-z}
}
EUVIMED