EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigating Speed and Temperature Effects on Puncture of Elastomers

A. Y. Siavoshani, S.-Q. Wang

Experimental Mechanics · 24.04.2026

DOI: 10.1007/s11340-026-01299-x ↗

Kurz gefasst

Fachartikel in der Zeitschrift Experimental Mechanics, online erschienen am 24.04.2026. Verfasst von A. Y. Siavoshani und 1 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Division of Materials Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

The failure of elastomers has begun to be understood through the lens of an intrinsic material lifetime rather than critical energy criteria.

Objective

This study gathers and describes phenomenology concerning the effects of speed and temperature on elastomeric puncture in terms of this recently proposed theoretical framework of elastomeric failure.

Methods

Continuous indentation experiments until puncture were performed over a range of indentation speeds and temperatures. Delayed puncture tests were conducted for the first time to experimentally measure the incubation time required for rupture under constant load.

Results

Continuous indentation reveals that, like tensile extension, elastomers exhibit higher strength on shorter timescales and under lower temperatures, i.e., the resistant normal force and displacement until puncture increase with indentation speed and decreasing temperature. Furthermore, the measured incubation time $${t}_{del-punct}$$ t d e l - p u n c t uncovers the elastomeric lifetime as an internal clock, which controls when puncture occurs.

Conclusions

(a) Stronger resistance to puncture at lower temperatures and higher indentation speed has been demonstrated and explained in terms of network rupture through chain scission, (b) for any pair of speed and temperature, another pair exists that produces puncture at the same strength and degree of indentation, implying the existence of a distinct time–temperature equivalence where the internal clock is network lifetime not polymer relaxation time.

Förderung

  • Division of Materials Research

Zitieren

APA

Siavoshani, A. Y., & Wang, S. (2026). Investigating Speed and Temperature Effects on Puncture of Elastomers. Experimental Mechanics. https://doi.org/10.1007/s11340-026-01299-x

Vancouver

Siavoshani AY, Wang S. Investigating Speed and Temperature Effects on Puncture of Elastomers. Experimental Mechanics. 2026. doi:10.1007/s11340-026-01299-x

BibTeX
@article{Siavoshani2026,
  author = {Siavoshani, A. Y. and Wang, S.-Q.},
  title = {Investigating Speed and Temperature Effects on Puncture of Elastomers},
  journal = {Experimental Mechanics},
  year = {2026},
  doi = {10.1007/s11340-026-01299-x}
}
Kostenlos starten →