EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

4D Porosity Evolution in Additively Manufactured 316L Stainless Steel through In-Situ Tensile Testing and X-Ray Computed Tomography

D Hertz-Eichenrode, H Talebinezhad, A Shmatok, R D Fischer, S Bremen, W Reichert, B C Prorok

Experimental Mechanics · 2025-04 · 65 (4) · 553-572

DOI: 10.1007/s11340-025-01180-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Experimental Mechanics, online erschienen am 17.04.2025. Verfasst von D Hertz-Eichenrode und 6 weiteren Autor:innen. Beteiligte Einrichtung: Materials Engineering, Auburn University, Auburn, AL USA. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Institute of Standards and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Many aspects of ductile failure through microvoid coalescence remain elusive due to the challenging spatial and temporal scales it operates on. Experimentally resolving all aspects of the process remains a significant goal of researchers. Much of the current understanding has been derived from post-mortem metallography, leaving key aspects of its evolution undocumented.

Objective

This work builds on efforts using X-ray computed tomography (XCT) characterize voids and their evolution under loading.

Methods

It employs in-situ XCT tensile testing on 316L Stainless Steel samples that were constructed by laser powder bed fusion that contain tailored, pre-existing voids with a spatial scale relevant to the growth and evolution stages of microvoid coalescence. Pre-existing voids extended the observation window for monitoring void growth and interaction under loading. They also enhanced fiducial correlation of voids during deformation.

Results

Void populations were found to increase under loading as their deformed dimensions rendered them detectable by the XCT algorithm. Neighboring voids underwent interconnection events by a cleavage process when stress concentrations between them exceeded the macroscopic yield stress. Pores that did not undergo interconnection events were found to revert to their initial size and population after unloading. Finally, the porosity structure before failure was correlated to features on the fracture surface with high fidelity.

Conclusions

This unique combination of in-situ XCT tensile testing on samples with tailored void structure enabled new visualization and quantification of void evolution under load as well as strong correlation to the observed stress–strain behavior and post-mortem fracture characteristics.

Schlagwörter

Stichwörter der Autor:innen

4D porosity analysisAdditive manufacturingIn-situ tensile testingMicrovoid coalescenceX-ray computed tomography

Autor:innen und Institutionen

  • Materials Engineering, Auburn University, Auburn, AL USA.
  • Mechanical Engineering and Mechatronics, University of Applied Science Aachen, Goethestraße 1, 52064 Aachen, Germany.

Förderung

  • National Institute of Standards and Technology

Zitieren

APA

Hertz-Eichenrode, D., Talebinezhad, H., Shmatok, A., Fischer, R. D., Bremen, S., Reichert, W., & Prorok, B. C. (2025). 4D Porosity Evolution in Additively Manufactured 316L Stainless Steel through In-Situ Tensile Testing and X-Ray Computed Tomography. Experimental Mechanics, 65(4), 553-572. https://doi.org/10.1007/s11340-025-01180-3

Vancouver

Hertz-Eichenrode D, Talebinezhad H, Shmatok A, Fischer RD, Bremen S, Reichert W, et al. 4D Porosity Evolution in Additively Manufactured 316L Stainless Steel through In-Situ Tensile Testing and X-Ray Computed Tomography. Experimental Mechanics. 2025;65(4):553-572. doi:10.1007/s11340-025-01180-3

BibTeX
@article{HertzEichenrode2025,
  author = {Hertz-Eichenrode, D and Talebinezhad, H and Shmatok, A and Fischer, R D and Bremen, S and Reichert, W and Prorok, B C},
  title = {4D Porosity Evolution in Additively Manufactured 316L Stainless Steel through In-Situ Tensile Testing and X-Ray Computed Tomography},
  journal = {Experimental Mechanics},
  year = {2025},
  volume = {65},
  number = {4},
  pages = {553--572},
  doi = {10.1007/s11340-025-01180-3}
}
Kostenlos starten →