Biosurfactant type and introduction order impact the morphology of biological CaCO3 during the MICP process
World Journal of Microbiology and Biotechnology · 2025
DOI: 10.1007/s11274-025-04445-0 ↗Kurz gefasst
Fachartikel in der Zeitschrift World Journal of Microbiology and Biotechnology, 2025. Verfasst von Weida Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, Yancheng Institute of Technology, Yancheng, 224051, China. 2022023260@stu.imust.edu.cn. Hauptthemen laut MEDLINE: Calcium Carbonate, Surface-Active Agents. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 68 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Yancheng Institute of Technology High-Level Talent Research Initiation Project, Key R&D and Achievement Transformation Program of Inner Mongolia Autonomous Region.
Abstract (Originalsprache)
In recent years, microbially induced carbonate precipitation (MICP) technology has attracted considerable attention; however, the morphology of biological calcium carbonate (Bio-CaCO3) produced in MICP exhibites variability, which impacts its application. This study employed rhamnolipids and sophorolipids to investigate the impact of biosurfactant type and introduction order on the morphology of Bio-CaCO3 in the MICP process. The findings indicated that the biosurfactant type and introduction order influenced the morphology of Bio-CaCO3 and the composition of dissolved organic matter (DOM) in the solution. In the absence of biosurfactants, the Bio-CaCO3 was primarily composed of rhombic calcite and spherical vaterite. The pre-introduction of rhamnolipids was observed to promote the formation of fasciculated agglomerates of calcite, while the pre-introduction of sophorolipids was observed to promote the formation of spherical agglomerates of calcite. The post-introduction rhamnolipids or sophorolipids were observed to stabilize hollow, spherical vaterite. The findings of the study indicated that the biosurfactant type and introduction order influenced the types and amount of DOM in solution, which in turn affected the MICP process and the morphology of Bio-CaCO3. This study provides a theoretical foundation for the regulation of the morphology of Bio-CaCO3 and the application of MICP technology.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Civil Engineering, Yancheng Institute of Technology, Yancheng, 224051, China. 2022023260@stu.imust.edu.cn.
- School of Civil Engineering, Yancheng Institute of Technology, Yancheng, 224051, China.
- College of Energy and Environment, Inner Mongolia University of Science and Technology, Baotou, 014010, China.
- School of Civil Engineering, Yancheng Institute of Technology, Yancheng, 224051, China. zywang@ycit.cn.
Förderung
- National Natural Science Foundation of China
- Yancheng Institute of Technology High-Level Talent Research Initiation Project
- Key R&D and Achievement Transformation Program of Inner Mongolia Autonomous Region
- Inner Mongolia Natural Science Foundation
Zitieren
APA
Wang, W., Zhu, M., Zou, C., Zhang, T., Han, J., & Wang, Z. (2025). Biosurfactant type and introduction order impact the morphology of biological CaCO3 during the MICP process. World Journal of Microbiology and Biotechnology. https://doi.org/10.1007/s11274-025-04445-0
Vancouver
Wang W, Zhu M, Zou C, Zhang T, Han J, Wang Z. Biosurfactant type and introduction order impact the morphology of biological CaCO3 during the MICP process. World Journal of Microbiology and Biotechnology. 2025. doi:10.1007/s11274-025-04445-0
BibTeX
@article{Wang2025,
author = {Wang, Weida and Zhu, Mingtao and Zou, Changxiong and Zhang, Tingting and Han, Jianhong and Wang, Zhaoyu},
title = {Biosurfactant type and introduction order impact the morphology of biological CaCO3 during the MICP process},
journal = {World Journal of Microbiology and Biotechnology},
year = {2025},
doi = {10.1007/s11274-025-04445-0}
}
EUVIMED