Enhanced Wear Resistance of Fine-Grained Ni-Based Coating via Annealing-Induced Phase Transformation
Tribology Letters · 2026-12 · 74 (4)
DOI: 10.1007/s11249-026-02219-9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Tribology Letters, online erschienen am 06.11.2026. Verfasst von Muhammad Arslan Hafeez und 3 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben. Gefördert von: Foundation for Innovative Research Groups of the Natural Science Foundation of Hubei Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
Annealing is widely applied to reduce porosity and enhance the wear resistance of thermally sprayed metallic coatings; however, its effectiveness is often limited by grain coarsening and brittle phase formation. Here, we present a new approach that directly overcomes these limitations by coupling thermal spraying with the crystallization behavior of a rationally designed amorphous alloy powder (Ni68.6Cr8.7Nb3P16B3.2Si0.5). Upon annealing at 800 °C for 1 h, the metastable Mg6Cu16Si7-type phase present in the as-sprayed coating transforms into a well-refined three-phase microstructure, comprising a ductile Ni-based solid solution and hard Ni3P and NbNi3 intermetallic phases, with 51% reduced intersplat density. This microstructural configuration results in a 21% reduction in COF and an 89% reduction in wear rate. The worn surface of annealed coating demonstrates minor thin grooves, lower fractions of oxides, and no sign of spallation, delamination or cracking, presenting a significant improvement in the wear resistance after annealing. This improvement originates from the three-phase composite microstructure in which the ductile Ni-based solid solution provides plastic deformability and crack resistance, whereas the hard Ni3P and NbNi3 phases provide hardness and load-bearing capacity. Annealed coating exhibits mild abrasive wear mechanism coupled with limited plastic deformation. These findings demonstrate that controlled crystallization of thermally sprayed coatings can be used to engineer beneficial phases, providing a promising strategy for the design of high-performance wear-resistant coatings.
Förderung
- Foundation for Innovative Research Groups of the Natural Science Foundation of Hubei Province
- National Natural Science Foundation of China
Zitieren
APA
Hafeez, M. A., He, J., Zhang, C., & Liu, L. (2026). Enhanced Wear Resistance of Fine-Grained Ni-Based Coating via Annealing-Induced Phase Transformation. Tribology Letters, 74(4). https://doi.org/10.1007/s11249-026-02219-9
Vancouver
Hafeez MA, He J, Zhang C, Liu L. Enhanced Wear Resistance of Fine-Grained Ni-Based Coating via Annealing-Induced Phase Transformation. Tribology Letters. 2026;74(4). doi:10.1007/s11249-026-02219-9
BibTeX
@article{Hafeez2026,
author = {Hafeez, Muhammad Arslan and He, Jia-Xuan and Zhang, Cheng and Liu, Lin},
title = {Enhanced Wear Resistance of Fine-Grained Ni-Based Coating via Annealing-Induced Phase Transformation},
journal = {Tribology Letters},
year = {2026},
volume = {74},
number = {4},
doi = {10.1007/s11249-026-02219-9}
}
EUVIMED