Tungsten-Based Polyoxometalate-Ionic Liquid as Lubricant Additive for Low-Viscosity PAO: Effect of Steel Composition and Microstructure on the Boundary Lubricating Performance
Tribology Letters · 2025-09 · 73 (3)
DOI: 10.1007/s11249-025-02033-9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Tribology Letters, online erschienen am 12.07.2025. Verfasst von M. L. Casasin-Garcia und 2 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NTNU Norwegian University of Science and Technology.
Abstract (Originalsprache)
The development of environmentally acceptable lubricants and lubricant additives has become a focal point within tribology due to increasing regulatory and sustainability demands. In this context, low-viscosity lubricants are gaining attention for their potential to reduce energy losses. However, their performance under a boundary lubrication regime, where thinner oil film build-up is present, requires more efficient boundary additives. This work evaluates a polyoxometalate-ionic liquid (POM-IL) as a multifunctional boundary additive in a low-viscosity polyalphaolefin-based lubricant, comparing its performance to zinc dialkyldithiophosphate (ZDDP) and a halogen-containing ionic liquid (IL). Tribological tests on AISI 316L stainless steel and AISI 52100 bearing steel revealed that while ZDDP showed substrate-independent adsorption and tribological performance, the IL-based additives had substrate-dependent behaviour. Strong chemisorption was consistent for both IL-based additives, yet their anti-wear and friction-reducing properties differed, showing evidence for the presence of a combined mechanism that includes both strong adsorption and tribochemical reactions. Additionally, the interaction between POM-ILs’ negatively charged surfaces, W atoms, and Cr(III) in 316L was identified as a key factor in their performance. Notably, significant work-hardening was observed in 316L lubricated with POM-IL-containing blends, further enhancing its anti-wear properties. These findings emphasize the role of substrate chemistry in boundary lubricant additive performance in low-viscosity lubricants, offering insights for the development of more efficient multifunctional boundary lubrication solutions.
Förderung
- NTNU Norwegian University of Science and Technology
Zitieren
APA
Casasin-Garcia, M. L., Mitchell, S. G., & Espallargas, N. (2025). Tungsten-Based Polyoxometalate-Ionic Liquid as Lubricant Additive for Low-Viscosity PAO: Effect of Steel Composition and Microstructure on the Boundary Lubricating Performance. Tribology Letters, 73(3). https://doi.org/10.1007/s11249-025-02033-9
Vancouver
Casasin-Garcia ML, Mitchell SG, Espallargas N. Tungsten-Based Polyoxometalate-Ionic Liquid as Lubricant Additive for Low-Viscosity PAO: Effect of Steel Composition and Microstructure on the Boundary Lubricating Performance. Tribology Letters. 2025;73(3). doi:10.1007/s11249-025-02033-9
BibTeX
@article{CasasinGarcia2025,
author = {Casasin-Garcia, M. L. and Mitchell, S. G. and Espallargas, N.},
title = {Tungsten-Based Polyoxometalate-Ionic Liquid as Lubricant Additive for Low-Viscosity PAO: Effect of Steel Composition and Microstructure on the Boundary Lubricating Performance},
journal = {Tribology Letters},
year = {2025},
volume = {73},
number = {3},
doi = {10.1007/s11249-025-02033-9}
}
EUVIMED