EUVIMEDEUVIMED entdecken
Crossref

High-Temperature Nitridation and Degradation of Austenitic Stainless Steels and Ni-Based Alloys for Ammonia Decomposition Systems: A Critical Review and Preliminary Experimental Observations

Peichen Yu, Yongbo Yuan, Longyu Ren, Zhiyang Fan, Hao Guan, Zhangjian Zhou, Hongyu Zhou, Yinsheng He, Wenyue Zheng

High Temperature Corrosion of Materials · 2026-10 · 103 (5)

DOI: 10.1007/s11085-026-10466-3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift High Temperature Corrosion of Materials, online erschienen am 05.10.2026. Verfasst von Peichen Yu und 8 weiteren Autor:innen. Die Arbeit nennt 133 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Reliable structural materials are essential for the safety of high-temperature ammonia decomposition systems, where components may experience complex NH3/H2/N2 atmospheres and associated nitridation-induced degradation. This review critically evaluates the high-temperature nitridation and associated degradation mechanisms of austenitic stainless steels and Ni-based alloys exposed to ammonia-containing environments relevant to ammonia decomposition systems. The available literature is analyzed by distinguishing direct ammonia-containing evidence from mechanistic evidence obtained under non-ammonia nitriding conditions, thereby clarifying the applicability and limitations of each evidence base. The review establishes the relationships among nitrogen supply, nitrogen ingress, nitride formation, elemental redistribution, defect evolution, and material degradation. The results demonstrate that nitridation responses are governed by the coupled effects of gas chemistry, temperature, exposure history, alloy chemistry, surface-scale stability, and defect-assisted transport rather than by alloy category alone. Austenitic stainless steels generally exhibit nitrogen enrichment, expanded-austenite evolution, and Cr-rich nitride precipitation, whereas Ni-based alloys tend to develop internal nitridation associated with strong nitride-forming elements such as Cr, Al, Ti, and Nb. These behaviors represent condition-dependent tendencies rather than strict distinctions between alloy classes. Preliminary NH3 exposure experiments on 310S stainless steel at 500 °C and Inconel 600 at 700 °C, each conducted for 300 h at an initial NH3 pressure of 3 MPa, are included as separate case studies to illustrate nitridation-related responses rather than to rank alloy resistance. This review highlights the need for more controlled NH3/H2/N2 exposure studies and coupled microstructural–mechanical characterization to support material selection for future ammonia decomposition systems.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yu, P., Yuan, Y., Ren, L., Fan, Z., Guan, H., Zhou, Z., Zhou, H., He, Y., & Zheng, W. (2026). High-Temperature Nitridation and Degradation of Austenitic Stainless Steels and Ni-Based Alloys for Ammonia Decomposition Systems: A Critical Review and Preliminary Experimental Observations. High Temperature Corrosion of Materials, 103(5). https://doi.org/10.1007/s11085-026-10466-3

Vancouver

Yu P, Yuan Y, Ren L, Fan Z, Guan H, Zhou Z, et al. High-Temperature Nitridation and Degradation of Austenitic Stainless Steels and Ni-Based Alloys for Ammonia Decomposition Systems: A Critical Review and Preliminary Experimental Observations. High Temperature Corrosion of Materials. 2026;103(5). doi:10.1007/s11085-026-10466-3

BibTeX
@article{Yu2026,
  author = {Yu, Peichen and Yuan, Yongbo and Ren, Longyu and Fan, Zhiyang and Guan, Hao and Zhou, Zhangjian and Zhou, Hongyu and He, Yinsheng and Zheng, Wenyue},
  title = {High-Temperature Nitridation and Degradation of Austenitic Stainless Steels and Ni-Based Alloys for Ammonia Decomposition Systems: A Critical Review and Preliminary Experimental Observations},
  journal = {High Temperature Corrosion of Materials},
  year = {2026},
  volume = {103},
  number = {5},
  doi = {10.1007/s11085-026-10466-3}
}
Kostenlos starten →