Novel Chromium–Silicon Slurry Coatings for Hot Corrosion Environments
High Temperature Corrosion of Materials · 2024-10 · 101 (5) · 1077-1089
DOI: 10.1007/s11085-024-10257-8 ↗Kurz gefasst
Fachartikel in der Zeitschrift High Temperature Corrosion of Materials, online erschienen am 24.07.2024. Verfasst von M. Kerbstadt und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union’s Horizon 2020 Research and Innovation Action, UKRI Future Leaders Fellowship, Royal Academy of Engineering Research Fellowship.
Abstract (Originalsprache)
Ni-based superalloys are commonly used in gas turbines because of their exceptional high-temperature mechanical properties. To secure a long service life, the materials must also have sufficient corrosion resistance. Therefore, diffusion coatings are widely used to enrich the surface in protective oxide scale-forming elements. For temperatures between 650 and 950 °C, where hot corrosion occurs, Cr-based coatings are advantageous. These are commonly applied via the laborious pack cementation process. Recently, a novel cost-effective Cr/Si slurry coating process has been developed which demonstrated resistance to oxidative high-temperature environments. Here, the protection of the slurry coatings against hot corrosion type I at 900 °C on the Ni-based superalloy Rene 80 is investigated and compared to coatings produced by pack cementation. Prior to the 300-h exposures in air containing 0.1% SO 2 at 900 °C, 4 mg/cm 2 of Na 2 SO 4 was deposited on the material surfaces. The uncoated Rene 80 exhibited rapid dissolution of the initial oxide scale followed by catastrophic break away oxidation. In comparison, the slurry coatings showed significantly improved hot corrosion resistance compared to the uncoated alloy and a better protection than a Cr pack cementation coating. The Cr pack cemented Rene 80 showed improved hot corrosion resistance, but Cr depletion in the subsurface zone occurred with increasing exposure time, associated with the propagation of Al internal oxidation and increasing sulfidation. In contrast, the slurry coatings formed an external Cr 2 O 3 scale coupled with an agglomeration of SiO 2 underneath and a continuous Al 2 O 3 subscale which offered a better diffusion barrier and leading to superior long-term protection against hot corrosion.
Förderung
- European Union’s Horizon 2020 Research and Innovation Action
- UKRI Future Leaders Fellowship
- Royal Academy of Engineering Research Fellowship
- DECHEMA-Forschungsinstitut
Zitieren
APA
Kerbstadt, M., Ma, K., White, E. M. H., Knowles, A. J., & Galetz, M. C. (2024). Novel Chromium–Silicon Slurry Coatings for Hot Corrosion Environments. High Temperature Corrosion of Materials, 101(5), 1077-1089. https://doi.org/10.1007/s11085-024-10257-8
Vancouver
Kerbstadt M, Ma K, White EMH, Knowles AJ, Galetz MC. Novel Chromium–Silicon Slurry Coatings for Hot Corrosion Environments. High Temperature Corrosion of Materials. 2024;101(5):1077-1089. doi:10.1007/s11085-024-10257-8
BibTeX
@article{Kerbstadt2024,
author = {Kerbstadt, M. and Ma, K. and White, E. M. H. and Knowles, A. J. and Galetz, M. C.},
title = {Novel Chromium–Silicon Slurry Coatings for Hot Corrosion Environments},
journal = {High Temperature Corrosion of Materials},
year = {2024},
volume = {101},
number = {5},
pages = {1077--1089},
doi = {10.1007/s11085-024-10257-8}
}
EUVIMED