High Temperature Corrosion Resistant and Anti-slagging Coatings for Boilers: A Review
High Temperature Corrosion of Materials · 2024-12 · 101 (S1) · 1-55
DOI: 10.1007/s11085-024-10251-0 ↗Kurz gefasst
Fachartikel in der Zeitschrift High Temperature Corrosion of Materials, online erschienen am 10.07.2024. Verfasst von Kritkasem Khantisopon und 4 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 168 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ARC Industrial Transformation Training Centre, Swinburne University of Technology.
Abstract (Originalsprache)
High temperature corrosion and slag deposition significantly reduce the thermal efficiency and lifespan of biomass-fired boilers. Surface modification with protective coatings can enhance boiler performance and prevent commercial losses due to maintenance and damage. This review focuses on the development of corrosion-resistant coatings (CRCs) and anti-slagging coatings (ASCs) over the past decade. CRCs are explored through thermal spray processes that include arc spray, atmospheric plasma spray (APS), high-velocity oxygen fuel (HVOF), detonation gun (D-gun™), and cold spray. Studies on alloys, ceramics, and ceramic–metal composites are summarised, highlighting the high temperature corrosion prevention mechanisms and discussing new coating materials. ASCs are reviewed in the context of advancements via thermal spray and slurry spray methods. The mechanisms for slag reduction, testing methods to evaluate ASC effectiveness, and the necessary architecture for preventing slag deposition are examined. A lab-based rig simulating fly ash deposition onto water-cooled coating coupons for anti-slagging investigations is also presented. Further research is needed to develop and evaluate materials for ASCs effectively. Graphical Abstract
Förderung
- ARC Industrial Transformation Training Centre
- Swinburne University of Technology
Zitieren
APA
Khantisopon, K., Singh, S., Jitputti, J., Berndt, C. C., & Ang, A. S. M. (2024). High Temperature Corrosion Resistant and Anti-slagging Coatings for Boilers: A Review. High Temperature Corrosion of Materials, 101(S1), 1-55. https://doi.org/10.1007/s11085-024-10251-0
Vancouver
Khantisopon K, Singh S, Jitputti J, Berndt CC, Ang ASM. High Temperature Corrosion Resistant and Anti-slagging Coatings for Boilers: A Review. High Temperature Corrosion of Materials. 2024;101(S1):1-55. doi:10.1007/s11085-024-10251-0
BibTeX
@article{Khantisopon2024,
author = {Khantisopon, Kritkasem and Singh, Surinder and Jitputti, Jaturong and Berndt, Christopher C. and Ang, Andrew S. M.},
title = {High Temperature Corrosion Resistant and Anti-slagging Coatings for Boilers: A Review},
journal = {High Temperature Corrosion of Materials},
year = {2024},
volume = {101},
number = {S1},
pages = {1--55},
doi = {10.1007/s11085-024-10251-0}
}
EUVIMED