EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Combined parameter and shape optimization of electric machines with isogeometric analysis

Michael Wiesheu, Theodor Komann, Melina Merkel, Sebastian Schöps, Stefan Ulbrich, Idoia Cortes Garcia

Optimization and Engineering · 2025-06 · 26 (2) · 1011-1038

DOI: 10.1007/s11081-024-09925-0 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Optimization and Engineering, online erschienen am 21.09.2024. Verfasst von Michael Wiesheu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In structural optimization, both parameters and shape are relevant for the model performance. Yet, conventional optimization techniques usually consider either parameters or the shape separately. This work addresses this problem by proposing a simple yet powerful approach to combine parameter and shape optimization in a framework using Isogeometric Analysis (IGA).The optimization employs sensitivity analysis by determining the gradients of an objective function with respect to parameters and control points that represent the geometry. The gradients with respect to the control points are calculated in an analytical way using the adjoint method, which enables straightforward shape optimization by altering these control points. Given that a change in a single geometry parameter corresponds to modifications in multiple control points, the chain rule is employed to obtain the gradient with respect to the parameters in an efficient semi-analytical way.The presented method is exemplarily applied to nonlinear 2D magnetostatic simulations featuring a permanent magnet synchronous motor and compared to designs, which were optimized using parameter and shape optimization separately. It is numerically shown that the permanent magnet mass can be reduced and the torque ripple can be eliminated almost completely by simultaneously adjusting rotor parameters and shape. The approach allows for novel designs to be created with the potential to reduce the optimization time substantially.

Förderung

  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Wiesheu, M., Komann, T., Merkel, M., Schöps, S., Ulbrich, S., & Garcia, I. C. (2025). Combined parameter and shape optimization of electric machines with isogeometric analysis. Optimization and Engineering, 26(2), 1011-1038. https://doi.org/10.1007/s11081-024-09925-0

Vancouver

Wiesheu M, Komann T, Merkel M, Schöps S, Ulbrich S, Garcia IC. Combined parameter and shape optimization of electric machines with isogeometric analysis. Optimization and Engineering. 2025;26(2):1011-1038. doi:10.1007/s11081-024-09925-0

BibTeX
@article{Wiesheu2025,
  author = {Wiesheu, Michael and Komann, Theodor and Merkel, Melina and Schöps, Sebastian and Ulbrich, Stefan and Garcia, Idoia Cortes},
  title = {Combined parameter and shape optimization of electric machines with isogeometric analysis},
  journal = {Optimization and Engineering},
  year = {2025},
  volume = {26},
  number = {2},
  pages = {1011--1038},
  doi = {10.1007/s11081-024-09925-0}
}
Kostenlos starten →