EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wire element: a kinematic compatibility-based curvilinear beam element for geometrically nonlinear analysis of highly flexible slender structures

Christian Iandiorio, Pietro Salvini

Multibody System Dynamics · 11.09.2026

DOI: 10.1007/s11044-026-10194-1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Multibody System Dynamics, online erschienen am 11.09.2026. Verfasst von Christian Iandiorio und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 90 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Università degli Studi di Roma Tor Vergata.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents a planar curvilinear beam finite element, referred to as the Wire Element, for the geometrically nonlinear analysis of slender one-dimensional structures undergoing large displacements and finite rotations. The proposed formulation differs from conventional displacement-interpolation approaches for it reconstructs the internal kinematics through direct integration of compatibility equations along the beam axis. Within a flexibility framework, the equilibrium relations, cross-sectional constitutive behaviour and kinematic compatibility altogether combine to derive the element response in the current configuration. The element accommodates the evolving geometry through internal section-slice discretization. At every converged configuration of the incremental–iterative procedure, each section-slice updates its orientation forming the one-dimensional curvilinear beam. The flexibility contribution of each slice is evaluated analytically and accumulated to construct the end-to-end element flexibility matrix; this allows to obtain the tangent stiffness matrix directly referred to ending nodes. As a result, the formulation enables the modelling of highly curved beams using a minimal degrees-of-freedom set, whatever curvature complexity is. The proposed element is assessed through comparisons with analytical Elastica solutions and with conventional geometrically nonlinear finite element analysis. The results demonstrate accurate prediction of large displacements and rotations equilibrium paths accompanied with a significant reduction of the required degrees-of-freedom and therefore computational effort. Owing to its compatibility-driven kinematic reconstruction, the formulation is particularly suited for applications where geometric fidelity and computational efficiency must be simultaneously addressed.

Förderung

  • Università degli Studi di Roma Tor Vergata

Zitieren

APA

Iandiorio, C., & Salvini, P. (2026). Wire element: a kinematic compatibility-based curvilinear beam element for geometrically nonlinear analysis of highly flexible slender structures. Multibody System Dynamics. https://doi.org/10.1007/s11044-026-10194-1

Vancouver

Iandiorio C, Salvini P. Wire element: a kinematic compatibility-based curvilinear beam element for geometrically nonlinear analysis of highly flexible slender structures. Multibody System Dynamics. 2026. doi:10.1007/s11044-026-10194-1

BibTeX
@article{Iandiorio2026,
  author = {Iandiorio, Christian and Salvini, Pietro},
  title = {Wire element: a kinematic compatibility-based curvilinear beam element for geometrically nonlinear analysis of highly flexible slender structures},
  journal = {Multibody System Dynamics},
  year = {2026},
  doi = {10.1007/s11044-026-10194-1}
}
Kostenlos starten →