Vibration transmission through the seated human body captured with a computationally efficient multibody model
Multibody System Dynamics · 2025-09 · 65 (1) · 1-34
DOI: 10.1007/s11044-024-10025-1 ↗Kurz gefasst
Fachartikel in der Zeitschrift Multibody System Dynamics, online erschienen am 06.09.2024. Verfasst von Raj Desai und 2 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Toyota Motor Corporation.
Abstract (Originalsprache)
Existing models of vibration transmission through the seated human body are primarily two-dimensional, focusing on the mid-sagittal plane and in-plane excitation. However, these models have limitations when the human body is subjected to vibrations in the mid-coronal plane. Three-dimensional (3D) human models have been primarily developed for impact analysis. Recently, we showed that such a 3D active human model can also predict vibration transmission. However, existing 3D body models suffer from excessive computational time requirements due to their complexity. To effectively analyze motion comfort, this research presents a 3D computationally efficient human model (EHM), running faster than real-time, with scope for real-time vehicle and seat motion control to enhance comfort. The EHM is developed by considering various combinations of body segments and joint degrees of freedom, interacting with multibody (MB) and finite element (FE) seat compliance models. Postural stabilization parameters are estimated using an optimization process based on experimental frequency-dependent gain responses for different postures (erect/slouched) and backrest support (low/high) conditions. The model combines two postural control mechanisms: 1) joint angle control capturing reflexive and intrinsic stabilization for each degree of freedom with PID controllers, including integration to eliminate drift, and 2) head-in-space control minimizing 3D head rotation. Interaction with a compliant seat was modeled using deformable finite elements and multibody contact models. Results showed the importance of modeling both compressive and shear deformation of the seat and the human body. Traditional stick-slip multibody contact failed to reproduce seat-to-human vibration transmission. Combining efficient body modeling principles, innovative postural adaptation techniques, and advanced seat contact strategies, this study lays a robust foundation for predicting and optimizing motion comfort.
Förderung
- Toyota Motor Corporation
Zitieren
APA
Desai, R., Papaioannou, G., & Happee, R. (2025). Vibration transmission through the seated human body captured with a computationally efficient multibody model. Multibody System Dynamics, 65(1), 1-34. https://doi.org/10.1007/s11044-024-10025-1
Vancouver
Desai R, Papaioannou G, Happee R. Vibration transmission through the seated human body captured with a computationally efficient multibody model. Multibody System Dynamics. 2025;65(1):1-34. doi:10.1007/s11044-024-10025-1
BibTeX
@article{Desai2025,
author = {Desai, Raj and Papaioannou, Georgios and Happee, Riender},
title = {Vibration transmission through the seated human body captured with a computationally efficient multibody model},
journal = {Multibody System Dynamics},
year = {2025},
volume = {65},
number = {1},
pages = {1--34},
doi = {10.1007/s11044-024-10025-1}
}
EUVIMED