EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synergistic thermo-hydraulic performance enhancement in a coaxial heat exchanger using hybrid Al2O3–ZnO nanofluids and turbulator inserts

Jamal-Eddine Salhi, Mohd Aamir Mumtaz, Tarik Zarrouk, Mohammed Jeyar, Tabish Alam, Mohamed Barboucha, Mohammod Hafizur Rahman, Dan Dobrotă

Journal of Thermal Analysis and Calorimetry · 02.11.2026

DOI: 10.1007/s10973-026-16291-9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Thermal Analysis and Calorimetry, online erschienen am 02.11.2026. Verfasst von Jamal-Eddine Salhi und 7 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present study investigates the thermo-hydraulic enhancement of a coaxial heat exchanger through the combined use of an Al 2 O 3 –ZnO/water hybrid nanofluid and optimized internal turbulator geometries under turbulent flow conditions. A hybrid nanofluid containing equal proportions of Al 2 O 3 and ZnO nanoparticles dispersed in water was numerically investigated for nanoparticle volume fractions ranging from 1 to 3% over a Reynolds number range of 5 × 10 4 to 10 5 . The results show that increasing the nanoparticle concentration significantly enhances convective heat transfer, with the 3% volume fraction providing the best overall thermo-hydraulic performance among the investigated cases. The introduction of turbulator inserts further promotes fluid mixing and thermal boundary-layer disruption, resulting in a maximum heat transfer enhancement of approximately 115% compared with the smooth tube using pure water. Although the inserts increase the friction factor, the optimal configuration maintains a favorable balance between heat transfer enhancement and hydraulic losses, achieving a maximum thermal enhancement factor (TEF) of 1.73. Among the investigated geometries, Model 5 exhibits the best thermo-hydraulic performance. These findings demonstrate that combining an optimized Al 2 O 3 –ZnO/water hybrid nanofluid with an appropriate turbulator geometry is an effective passive strategy for improving the efficiency of compact coaxial heat exchangers.

Zitieren

APA

Salhi, J., Mumtaz, M. A., Zarrouk, T., Jeyar, M., Alam, T., Barboucha, M., Rahman, M. H., & Dobrotă, D. (2026). Synergistic thermo-hydraulic performance enhancement in a coaxial heat exchanger using hybrid Al2O3–ZnO nanofluids and turbulator inserts. Journal of Thermal Analysis and Calorimetry. https://doi.org/10.1007/s10973-026-16291-9

Vancouver

Salhi J, Mumtaz MA, Zarrouk T, Jeyar M, Alam T, Barboucha M, et al. Synergistic thermo-hydraulic performance enhancement in a coaxial heat exchanger using hybrid Al2O3–ZnO nanofluids and turbulator inserts. Journal of Thermal Analysis and Calorimetry. 2026. doi:10.1007/s10973-026-16291-9

BibTeX
@article{Salhi2026,
  author = {Salhi, Jamal-Eddine and Mumtaz, Mohd Aamir and Zarrouk, Tarik and Jeyar, Mohammed and Alam, Tabish and Barboucha, Mohamed and Rahman, Mohammod Hafizur and Dobrotă, Dan},
  title = {Synergistic thermo-hydraulic performance enhancement in a coaxial heat exchanger using hybrid Al2O3–ZnO nanofluids and turbulator inserts},
  journal = {Journal of Thermal Analysis and Calorimetry},
  year = {2026},
  doi = {10.1007/s10973-026-16291-9}
}
Kostenlos starten →