EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Structure and superconducting performance of YBa2Cu3O7-δ bulk added with carbon nanotubes prepared by thermal treatment method

Fatma Barood, Mohd Mustafa Awang Kechik, Ryad Alhadei Arebat, Soo Kien Chen, Kean Pah Lim, Abdul Halim Shaari, Khairul Khaizi Mohd Shariff, Azhan Hashim

Journal of Thermal Analysis and Calorimetry · 2026-09 · 151 (22) · 19203-19217

DOI: 10.1007/s10973-026-16159-y ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Thermal Analysis and Calorimetry, online erschienen am 23.09.2026. Verfasst von Fatma Barood und 7 weiteren Autor:innen. Die Arbeit nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Universiti Putra Malaysia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

YBa2Cu3O7-δ (Y123) superconductors with different concentrations of single-walled carbon nanotubes (CNTs) (x = 0.2–1.0 mass%) were synthesized using a thermal treatment method. The influence of CNT addition on the structural, microstructural, and superconducting properties was investigated using thermogravimetric analysis (TGA/DTG), X-ray diffraction (XRD), field-emission scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (FESEM–EDX), AC susceptibility (ACS), and the four-point probe (4PP) technique. Thermal stability was examined using TGA-DTG analysis. XRD analysis confirmed that the orthorhombic Y123 phase remained dominant in all samples. Minor secondary phases, including Y2BaCuO5 (Y211) (0.2–12.3%), were detected in all CNT-added samples, while the Y2Ba4Cu7O15−δ (Y247) phase (4.2%) was identified at x = 0.8 mass% CNT. FESEM observations revealed a reduction in the average grain size with CNT incorporation. AC susceptibility measurements showed a slight increase in the onset transition temperature (Tc-onset), rising from 91.7 K for the undoped sample to 92.3 K for the sample containing 0.4 mass% CNT. The peak temperature (Tp) of the imaginary component shifted towards higher temperatures for the samples with x = 0.4 and 0.8 mass% CNT. Electrical resistivity measurements confirmed superconducting behaviour in all samples, with the sharpest superconducting transition (ΔTc) observed at x = 0.4 mass% CNT. The critical current density (Jc), determined from the current–voltage characteristics, increased from 2.04 A cm−2 for the undoped Y123 sample to 8.1 A cm−2 for the sample containing 0.4 mass% CNT. These results indicate that an optimal CNT addition improves grain connectivity and flux-pinning behaviour, thereby enhancing the superconducting performance of Y123 ceramics.

Förderung

  • Universiti Putra Malaysia

Zitieren

APA

Barood, F., Kechik, M. M. A., Arebat, R. A., Chen, S. K., Lim, K. P., Shaari, A. H., Shariff, K. K. M., & Hashim, A. (2026). Structure and superconducting performance of YBa2Cu3O7-δ bulk added with carbon nanotubes prepared by thermal treatment method. Journal of Thermal Analysis and Calorimetry, 151(22), 19203-19217. https://doi.org/10.1007/s10973-026-16159-y

Vancouver

Barood F, Kechik MMA, Arebat RA, Chen SK, Lim KP, Shaari AH, et al. Structure and superconducting performance of YBa2Cu3O7-δ bulk added with carbon nanotubes prepared by thermal treatment method. Journal of Thermal Analysis and Calorimetry. 2026;151(22):19203-19217. doi:10.1007/s10973-026-16159-y

BibTeX
@article{Barood2026,
  author = {Barood, Fatma and Kechik, Mohd Mustafa Awang and Arebat, Ryad Alhadei and Chen, Soo Kien and Lim, Kean Pah and Shaari, Abdul Halim and Shariff, Khairul Khaizi Mohd and Hashim, Azhan},
  title = {Structure and superconducting performance of YBa2Cu3O7-δ bulk added with carbon nanotubes prepared by thermal treatment method},
  journal = {Journal of Thermal Analysis and Calorimetry},
  year = {2026},
  volume = {151},
  number = {22},
  pages = {19203--19217},
  doi = {10.1007/s10973-026-16159-y}
}
Kostenlos starten →