EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A comparative study of electric current-assisted and conventional sintering of Inconel 718 superalloy

Nuri Ergin, Necati Koçak, Özkan Özdemir

Journal of Thermal Analysis and Calorimetry · 2024-05 · 149 (10) · 4367-4384

DOI: 10.1007/s10973-024-13008-8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Thermal Analysis and Calorimetry, online erschienen am 12.05.2024. Verfasst von Nuri Ergin und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sakarya University of Applied Sciences.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, In718 powder mixtures prepared from elemental powders following stoichiometric composition and supplied as a commercial product were produced by conventional powder metallurgy (1300 °C/4 h) and electric current-assisted sintering (ECAS)(1700-2300A/10 min) methods and followed by a double-aging heat treatment. The characterization studies determined that the best results were the sample produced by the ECAS method using the elemental powder mixture. The targeted precipitate γ ′, γ ″, and δ phases were obtained after the heat treatment, and a hardness value of 344 ± 41 HV 0.5 and a relative density of 98.96% were achieved. The sample preserved its surface integrity by exhibiting high corrosion resistance from hot corrosion studies in the temperature range of 650–850 °C and NaSO 4 + 60%V 2 O 5 environment. The corrosion rate of the sample, which was subjected to electrochemical corrosion tests in 3.5% NaCl and 10% NaNO 3 solutions, was determined as 45.59 mpy and 10.56 mpy, respectively.

Förderung

  • Sakarya University of Applied Sciences

Zitieren

APA

Ergin, N., Koçak, N., & Özdemir, Ö. (2024). A comparative study of electric current-assisted and conventional sintering of Inconel 718 superalloy. Journal of Thermal Analysis and Calorimetry, 149(10), 4367-4384. https://doi.org/10.1007/s10973-024-13008-8

Vancouver

Ergin N, Koçak N, Özdemir Ö. A comparative study of electric current-assisted and conventional sintering of Inconel 718 superalloy. Journal of Thermal Analysis and Calorimetry. 2024;149(10):4367-4384. doi:10.1007/s10973-024-13008-8

BibTeX
@article{Ergin2024,
  author = {Ergin, Nuri and Koçak, Necati and Özdemir, Özkan},
  title = {A comparative study of electric current-assisted and conventional sintering of Inconel 718 superalloy},
  journal = {Journal of Thermal Analysis and Calorimetry},
  year = {2024},
  volume = {149},
  number = {10},
  pages = {4367--4384},
  doi = {10.1007/s10973-024-13008-8}
}
Kostenlos starten →