La-doped CdS/SnO2 double electron transport layer for Sb2S3 solar cells
Journal of Sol-Gel Science and Technology · 26.05.2026 · 118 (3)
DOI: 10.1007/s10971-025-07072-1 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Sol-Gel Science and Technology, online erschienen am 26.05.2026. Verfasst von Siyu Zhang und 6 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Antimony sulfide (Sb₂S₃) is a highly promising environmentally friendly semiconductor for the development of stable thin-film solar cells, owing to its high absorption coefficient, suitable bandgap ( ~ 1.7 eV), and the abundance of its constituent elements. Conventionally, CdS is employed as a buffer layer in CdS/Sb₂S₃/spiro/Au-structured solar cells. However, due to its intrinsic defects, various strategies have been implemented to enhance device performance and improve the power conversion efficiency (PCE) of Sb₂S₃ solar cells. In this study, we first fabricated a SnO₂ electron transport layer (ETL) and subsequently optimized the water bath temperature to achieve a smoother CdS layer. Furthermore, a La³⁺ ion doping process was introduced to further decrease the resistance of the CdS layer. The incorporation of an appropriate concentration of La³⁺ into the CdS layer effectively redeced its resistivity. By integrating these enhancements, we developed a La-doped CdS/SnO₂ double ETL structure. The grain size of Sb₂S₃ deposited on the 1% La-doped CdS/SnO₂ double ETL was significantly increased, leading to a substantial reduction in grain boundary density. This improvement minimized non-radiative recombination at both the grain boundaries and the CdS/Sb₂S₃ heterointerface while simultaneously enhancing charge-carrier transport across the heterojunction. Consequently, the optimized solar cell achieved an open-circuit voltage (VOC) of 749 mV and a short-circuit current density (Jsc) of 17.01 mA/cm2, resulting in a power conversion efficiency (PCE) of 7.66%. This work presents an effective doping strategy to enhance the performance of the CdS buffer layer, offering valuable insights for the advancement of Sb₂S₃-based thin-film solar cells. We supplied a very simple and effective method for the preparation of SnO2 electron transport layer. We supplied a La3+ process method to improve the performance of CdS ETL for Sb2S3 solar cells, and the method may be effective for other rare earth ions. The enhancement of CdS leads to a distinctively PCE enhancement of Sb2S3 solar cells from 6.47% to 7.66%. We supplied a very simple and effective method for the preparation of SnO2 electron transport layer. We supplied a La3+ process method to improve the performance of CdS ETL for Sb2S3 solar cells, and the method may be effective for other rare earth ions. The enhancement of CdS leads to a distinctively PCE enhancement of Sb2S3 solar cells from 6.47% to 7.66%.
Zitieren
APA
Zhang, S., He, R., Cai, C., Sun, Y., Li, R., Yang, M., & Liu, H. (2026). La-doped CdS/SnO2 double electron transport layer for Sb2S3 solar cells. Journal of Sol-Gel Science and Technology, 118(3). https://doi.org/10.1007/s10971-025-07072-1
Vancouver
Zhang S, He R, Cai C, Sun Y, Li R, Yang M, et al. La-doped CdS/SnO2 double electron transport layer for Sb2S3 solar cells. Journal of Sol-Gel Science and Technology. 2026;118(3). doi:10.1007/s10971-025-07072-1
BibTeX
@article{Zhang2026,
author = {Zhang, Siyu and He, Ruitao and Cai, Chaomin and Sun, Yuxia and Li, Ruiming and Yang, Man and Liu, Hongri},
title = {La-doped CdS/SnO2 double electron transport layer for Sb2S3 solar cells},
journal = {Journal of Sol-Gel Science and Technology},
year = {2026},
volume = {118},
number = {3},
doi = {10.1007/s10971-025-07072-1}
}
EUVIMED