Effect of UV-induced crosslink network structure on the properties of polylactic acid/polybutylene adipate terephthalate blend
Journal of Polymer Research · 2024-07 · 31 (7)
DOI: 10.1007/s10965-024-04024-1 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Polymer Research, online erschienen am 20.06.2024. Verfasst von Xueyan Bian und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovation and Technology Fund of Hong Kong Special Administrative Region, Wuyi University-Hong Kong Joint Research Fund under the Hong Kong Polytechnic University and Wuyi University collaborative flamework agreement,, Wuyi University–Hong Kong/Macau Joint Research Funds.
Abstract (Originalsprache)
Over the past few decades, biobased polylactic acid (PLA) has emerged as the most promising option to replace some of the fossil-based and nonbiodegradable polymers due to environmental concerns. In this study, a flexible polymer, polybutylene adipate terephthalate (PBAT) was blended with PLA to improve the toughness and flexibility of PLA, and the PLA/PBAT blend was further UV-induced to form crosslink structure. The results show that the flexibility and toughness of PLA could be significantly enhanced when PBAT was introduced, and the compatibility of PLA and PBAT could be enhanced by the development of a crosslink structure. Especially, the elongation at break and unnotched impact strength of ABT-UV30 (PLA/PBAT/triallyisocyanurate (TAIC) exposed to ultraviolet (UV) light for 30 min) was increased to 3.9 and 8.4 times of neat PLA. The glass transition temperature (Tg) of PLA was increased from 63.4 to 72.9 °C as the radiation duration was prolonged to 60 min. The melting point temperature of PBAT was also increased gradually until it eventually coincided with that of PLA. The thermalgravimetric analyzer thermograms show that a moderate amount of UV radiation can improve the thermal stability of the sample while an excessive amount of UV radiation can reduce the degradation temperature.
Förderung
- Innovation and Technology Fund of Hong Kong Special Administrative Region
- Wuyi University-Hong Kong Joint Research Fund under the Hong Kong Polytechnic University and Wuyi University collaborative flamework agreement,
- Wuyi University–Hong Kong/Macau Joint Research Funds
- PhD scholarship provided by the Hong Kong Polytechnic University
- Hong Kong Polytechnic University
Zitieren
APA
Bian, X., Fan, S., Xia, G., Xin, J. H., & Jiang, S. (2024). Effect of UV-induced crosslink network structure on the properties of polylactic acid/polybutylene adipate terephthalate blend. Journal of Polymer Research, 31(7). https://doi.org/10.1007/s10965-024-04024-1
Vancouver
Bian X, Fan S, Xia G, Xin JH, Jiang S. Effect of UV-induced crosslink network structure on the properties of polylactic acid/polybutylene adipate terephthalate blend. Journal of Polymer Research. 2024;31(7). doi:10.1007/s10965-024-04024-1
BibTeX
@article{Bian2024,
author = {Bian, Xueyan and Fan, Suju and Xia, Gang and Xin, John H. and Jiang, Shouxiang},
title = {Effect of UV-induced crosslink network structure on the properties of polylactic acid/polybutylene adipate terephthalate blend},
journal = {Journal of Polymer Research},
year = {2024},
volume = {31},
number = {7},
doi = {10.1007/s10965-024-04024-1}
}
EUVIMED