EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Enhancing the Curing Efficiency and Physicochemical Properties of Acrylated Epoxidized Palm Oil Polyurethane Coatings via Double Acrylation-Thiol Modification

Siti Noor Hidayah Mustapha, Mohamad Ismail Mohamad Isa, Muhammad Safwan Shamsuddin, Rasidi Roslan, Rohani Mustapha, Mohd Jumain Jalil

Journal of Polymers and the Environment · 2025-07 · 33 (7) · 3368-3387

DOI: 10.1007/s10924-025-03589-2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Polymers and the Environment, online erschienen am 29.05.2025. Verfasst von Siti Noor Hidayah Mustapha und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Universiti Malaysia Pahang Al-Sultan Abdullah.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The slow curing and suboptimal properties of epoxidized palm oil polyurethane acrylate (EPOUA) coatings remain significant challenges that limit their performance. This study enhances these coatings by applying acrylation-thiol (AT) modification onto the EPOUA coatings provided double acrylation-thiol effect to the EPOUA. EPOUA and AT were first synthesized separately, then the AT was blended at concentrations of 2, 4, 6, and 8 parts per hundred resin (phr) EPOUA. The blended mixture was then cast onto a silicone mold with a thickness of 1 mm and cured using ultraviolet (UV) radiation. The results show that 2 and 4 phr AT significantly improved curing, reducing time by 15 and 30 s, respectively. Crosslinking density also increased, with gel content rising by 6% and 9% at 2 and 4 phr AT, respectively, while maintaining low volatile organic compound (VOC) emissions (< 5%). Physical properties improved, with hardness increasing threefold at 2 phr AT and fourfold at 4 phr AT on glass, plywood, and steel. Adhesion remained excellent (5B rating) on plywood, steel, and aluminum. However, higher AT concentrations (6 and 8 phr) resulted in inconsistent curing and increased VOC emissions. These findings indicate that 4 phr AT optimally improves EPOUA coatings’ curing efficiency, crosslinking, and mechanical properties while maintaining environmental compliance.

Förderung

  • Universiti Malaysia Pahang Al-Sultan Abdullah

Zitieren

APA

Mustapha, S. N. H., Isa, M. I. M., Shamsuddin, M. S., Roslan, R., Mustapha, R., & Jalil, M. J. (2025). Enhancing the Curing Efficiency and Physicochemical Properties of Acrylated Epoxidized Palm Oil Polyurethane Coatings via Double Acrylation-Thiol Modification. Journal of Polymers and the Environment, 33(7), 3368-3387. https://doi.org/10.1007/s10924-025-03589-2

Vancouver

Mustapha SNH, Isa MIM, Shamsuddin MS, Roslan R, Mustapha R, Jalil MJ. Enhancing the Curing Efficiency and Physicochemical Properties of Acrylated Epoxidized Palm Oil Polyurethane Coatings via Double Acrylation-Thiol Modification. Journal of Polymers and the Environment. 2025;33(7):3368-3387. doi:10.1007/s10924-025-03589-2

BibTeX
@article{Mustapha2025,
  author = {Mustapha, Siti Noor Hidayah and Isa, Mohamad Ismail Mohamad and Shamsuddin, Muhammad Safwan and Roslan, Rasidi and Mustapha, Rohani and Jalil, Mohd Jumain},
  title = {Enhancing the Curing Efficiency and Physicochemical Properties of Acrylated Epoxidized Palm Oil Polyurethane Coatings via Double Acrylation-Thiol Modification},
  journal = {Journal of Polymers and the Environment},
  year = {2025},
  volume = {33},
  number = {7},
  pages = {3368--3387},
  doi = {10.1007/s10924-025-03589-2}
}
Kostenlos starten →