EUVIMEDEUVIMED entdecken
Crossref

Optimizing the White Light Emission of Pr3+ Activated SrCeO3 Perovskite by Controlling the Excitation Wavelength for High CRI wLED Applications

C K Shilpa, M V Abin Prasanth, S V Jasira, V P Veena, K M Nissamudeen

Journal of Fluorescence · 12.03.2024 · 35 (4) · 1995-2012

DOI: 10.1007/s10895-024-03651-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fluorescence, online erschienen am 12.03.2024. Verfasst von C K Shilpa und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Pure and Applied Physics, Kannur University, Payyanur Campus, Edat, Kannur, 670327, Kerala, India. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 49 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The current research illustrates excitation energy-triggered photoluminescent characteristics of Pr3+ions in SrCeO3 providing a practical approach for developing high CRI wLED and its applications. SrCeO3: xPr3+ (x = 0, 0.005, 0.01, 0.02, 0.03 wt) perovskites synthesized by fuel excess gel combustion method generate high CRI (~98) for wLED applications. Crystalline phosphors with orthorhombic structures having space group Pnma were confirmed by XRD. The unit cell volume expansion occurred with an increase in Pr3+ concentration was verified through the Rietveld refinement technique. Surface morphology, particle distribution, and size were observed via FE-SEM imaging, and detected a well-defined regular distorted spherical structure with average grain size 0.826 μm for Pr3+ doped SrCeO3. Elemental mapping and EDS analysis identified the uniform distribution and elemental purity of SrCeO3: 0.01 Pr3+. Further, the molecular vibrations and modes were analyzed from the Raman spectrum. Moreover, the average particle size assessed via TEM analysis was found to be ~83.2 nm, consistent with XRD analysis. UV-visible absorption spectra for optical energy-band gap analysis showed a decrease in band gap energy with an increase in Pr3+ concentration, realizing an effective energy transfer from Ce4+ to Pr3+. PL measurements showed a huge variety of emission transitions, corresponding to excitations 290 nm, 321 nm, 373 nm, and 449 nm. The critical dopant concentration instigated by concentration quenching was 1 wt% Pr3+, ascribed to dipole-dipole interaction. The fluorescence lifetime of the optimal sample was 4.835 μs. Commission International de I'Eclairage (CIE) diagram exposes the white light emanation of SrCeO3: Pr3+. Among which white light with high CRI (~98) and comparably low CCT (~6311 K) was obtained for SrCeO3: 0.01 Pr3+ at 373 nm excitation. The obtained results recommend that SrCeO3: Pr3+ perovskite as an efficient white phosphor for fabricating high-performance wLEDs.

Schlagwörter

Stichwörter der Autor:innen

PerovskitePraseodymiumStrontium ceratewLED

Autor:innen und Institutionen

  • School of Pure and Applied Physics, Kannur University, Payyanur Campus, Edat, Kannur, 670327, Kerala, India.
  • School of Pure and Applied Physics, Mahatma Gandhi University, Kottayam, Kerala, 686560, India.
  • School of Pure and Applied Physics, Kannur University, Payyanur Campus, Edat, Kannur, 670327, Kerala, India. nisamkm@kannuruniv.ac.in.

Zitieren

APA

Shilpa, C. K., Abin Prasanth, M. V., Jasira, S. V., Veena, V. P., & Nissamudeen, K. M. (2024). Optimizing the White Light Emission of Pr3+ Activated SrCeO3 Perovskite by Controlling the Excitation Wavelength for High CRI wLED Applications. Journal of Fluorescence, 35(4), 1995-2012. https://doi.org/10.1007/s10895-024-03651-7

Vancouver

Shilpa CK, Abin Prasanth MV, Jasira SV, Veena VP, Nissamudeen KM. Optimizing the White Light Emission of Pr3+ Activated SrCeO3 Perovskite by Controlling the Excitation Wavelength for High CRI wLED Applications. Journal of Fluorescence. 2024;35(4):1995-2012. doi:10.1007/s10895-024-03651-7

BibTeX
@article{Shilpa2024,
  author = {Shilpa, C K and Abin Prasanth, M V and Jasira, S V and Veena, V P and Nissamudeen, K M},
  title = {Optimizing the White Light Emission of Pr3+ Activated SrCeO3 Perovskite by Controlling the Excitation Wavelength for High CRI wLED Applications},
  journal = {Journal of Fluorescence},
  year = {2024},
  volume = {35},
  number = {4},
  pages = {1995--2012},
  doi = {10.1007/s10895-024-03651-7}
}
Kostenlos starten →