EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Sustainable development of ZnO nanoparticles and nanocellulose-modified CPE for electrochemical sensing of tinidazole

Mohamed Abd-Elsabour, Mortaga M Abou-Krisha, Abdulrahman G Alhamzani, Ehab A Abdelrahman

Journal of Materials Science: Materials in Medicine · 2026

DOI: 10.1007/s10856-026-07010-9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Materials Science: Materials in Medicine, 2026. Verfasst von Mohamed Abd-Elsabour und 3 weiteren Autor:innen. Beteiligte Einrichtung: Chemistry Department, Faculty of Science, Luxor University, Luxor, 85951, Egypt. m.sabour28@sci.svu.edu.eg. Hauptthemen laut MEDLINE: Zinc Oxide, Cellulose, Electrochemical Techniques, Tinidazole. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The detection of tinidazole (TIZ) in environmental and pharmaceutical samples remains constrained by conventional electrochemical sensors, which often rely on energy-intensive synthesis routes and toxic modifiers, undermining their sustainability. To bridge this gap, this study introduces a green synthesis approach for sensor fabrication, leveraging the concept of waste-to-value by converting banana peel into nanocellulose (PNC) and using it as a sustainable scaffold for zinc oxide nanoparticles (ZnO NPs). The enhanced performance of the PNC-ZnO/CPE sensor originates from a synergistic interplay between the high surface area and conductivity of ZnO NPs and the dispersive and stabilizing properties of PNC, which collectively facilitate the electron transfer kinetics for TIZ reduction. The prepared samples were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDX). The sensor demonstrated a linear response to TIZ concentrations ranging from 9.0 ×10 −9 M to 25.0 ×10 −6 M, with a detection limit of 2.1 nM under optimized conditions. Furthermore, selectivity was quantitatively demonstrated, with the sensor maintaining a stable signal (

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Zinc OxideCelluloseElectrochemical TechniquesTinidazoleMetal NanoparticlesNanoparticlesMicroscopy, Electron, ScanningGreen Chemistry TechnologyX-Ray DiffractionLimit of DetectionElectrodesSpectrometry, X-Ray Emission

Substanzen

Zinc OxideCelluloseTinidazole

Autor:innen und Institutionen

  • Chemistry Department, Faculty of Science, Luxor University, Luxor, 85951, Egypt. m.sabour28@sci.svu.edu.eg.
  • Chemistry Department, College of Science, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh, 11623, Saudi Arabia.

Zitieren

APA

Abd-Elsabour, M., Abou-Krisha, M. M., Alhamzani, A. G., & Abdelrahman, E. A. (2026). Sustainable development of ZnO nanoparticles and nanocellulose-modified CPE for electrochemical sensing of tinidazole. Journal of Materials Science: Materials in Medicine. https://doi.org/10.1007/s10856-026-07010-9

Vancouver

Abd-Elsabour M, Abou-Krisha MM, Alhamzani AG, Abdelrahman EA. Sustainable development of ZnO nanoparticles and nanocellulose-modified CPE for electrochemical sensing of tinidazole. Journal of Materials Science: Materials in Medicine. 2026. doi:10.1007/s10856-026-07010-9

BibTeX
@article{AbdElsabour2026,
  author = {Abd-Elsabour, Mohamed and Abou-Krisha, Mortaga M and Alhamzani, Abdulrahman G and Abdelrahman, Ehab A},
  title = {Sustainable development of ZnO nanoparticles and nanocellulose-modified CPE for electrochemical sensing of tinidazole},
  journal = {Journal of Materials Science: Materials in Medicine},
  year = {2026},
  doi = {10.1007/s10856-026-07010-9}
}
Kostenlos starten →