Enzymatic electrochemical biosensor for glucose detection based on biomass-derived Fe3O4/C and PEDOT:PSS modification
Journal of Materials Science: Materials in Electronics · 2024-11 · 35 (33)
DOI: 10.1007/s10854-024-13885-7 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Materials Science: Materials in Electronics, online erschienen am 23.11.2024. Verfasst von Ece Kesici-Meco und 1 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 81 Literaturangaben. Gefördert von: Bursa Technical University.
Abstract (Originalsprache)
Enzyme-based electrochemical biosensors allow sensitive and selective detection of blood glucose levels and enable diabetes patients personalize their treatment plans. Biocompatible, low-toxic, abundant and electroactive iron oxide (Fe3O4) nanoparticles are widely used as biosensor electrode materials. Herein, Fe3O4/Carbon (Fe3O4/C) nanocomposite was obtained through hydrothermal carbonization and successive calcination of heteroatom-rich spirulina (Arthrospira platensis,SP) biomass on Fe3O4 nanoparticles. Functionality and electrical conductivity of the Fe3O4/C nanocomposite was further enriched by a conductive poly(3,4-ethylenedioxythiophene) polystyrenesulfonate coating (Fe3O4/C/PEDOT:PSS). Glucose oxidase (GOx) was physically immobilized on the electrodes and glucose was detected by means of electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) methods. The glucose detection limits for the Fe3O4/C/GOx electrode were calculated as 0.73 mM (CV) and 1.04 mM (EIS) in the linear concentration range of 5–15 mM. The glucose detection limits for the Fe3O4/C/PEDOT:PSS/GOx electrode were calculated as 0.03 mM (CV) and 0.13 mM (EIS) in the linear concentration range of 0.5–1.5 mM. The selectivity of the biosensor was tested in the presence of ascorbic acid. Sensitive, selective, low-cost, and biocompatible electrodes provide a valuable tool in the management of diabetes.
Förderung
- Bursa Technical University
Zitieren
APA
Kesici-Meco, E., & Unur-Yilmaz, E. (2024). Enzymatic electrochemical biosensor for glucose detection based on biomass-derived Fe3O4/C and PEDOT:PSS modification. Journal of Materials Science: Materials in Electronics, 35(33). https://doi.org/10.1007/s10854-024-13885-7
Vancouver
Kesici-Meco E, Unur-Yilmaz E. Enzymatic electrochemical biosensor for glucose detection based on biomass-derived Fe3O4/C and PEDOT:PSS modification. Journal of Materials Science: Materials in Electronics. 2024;35(33). doi:10.1007/s10854-024-13885-7
BibTeX
@article{KesiciMeco2024,
author = {Kesici-Meco, Ece and Unur-Yilmaz, Ece},
title = {Enzymatic electrochemical biosensor for glucose detection based on biomass-derived Fe3O4/C and PEDOT:PSS modification},
journal = {Journal of Materials Science: Materials in Electronics},
year = {2024},
volume = {35},
number = {33},
doi = {10.1007/s10854-024-13885-7}
}
EUVIMED