Yield optimization of nonedible vegetable oil-based bio-lubricant using design of experiments
Environment, Development and Sustainability · 11.02.2024 · 26 (11) · 29557-29582
DOI: 10.1007/s10668-024-04529-1 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environment, Development and Sustainability, online erschienen am 11.02.2024. Verfasst von Rajendra Uppar und 2 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Manipal Academy of Higher Education, Manipal.
Abstract (Originalsprache)
In recent years, there has been a focused effort to reduce the harmful effects of synthetic and mineral-based lubricants by emphasizing the use of biodegradable-based lubricants. These lubricants play a crucial role in minimizing friction, ensuring smooth operation of machines, and reducing the likelihood of frequent failures. With petroleum-based reserves depleting worldwide, prices are rising, and environmental damage is increasing. However, biolubricants derived from nonedible vegetable oils offer environmental benefits as they are nontoxic, emit minimal greenhouse gases, and are biodegradable. In this study, biolubricants are synthesized from jatropha and jojoba oil using sulphuric acid (H 2 SO 4 ) and hydrochloric acid (HCl) as catalysts through the transesterification and epoxidation processes. The optimization of influencing parameters is achieved using Taguchi’s orthogonal array, a statistical methodology. By employing design of experiments (DOE), the number of experimental trials is minimized while providing comprehensive details on the impact of control factors such as molar ratio, catalyst concentrations, and temperature. The results obtained from DOE reveal that the best optimized yield for jatropha biolubricant with H 2 SO 4 and HCl catalysts is achieved with a molar ratio of 0.5:1.5, a temperature of 70 °C, and a catalyst concentration of 1.2 ml. The experimental yield for jatropha biolubricant with H 2 SO 4 and HCl catalysts was measured at 226 ml and 238 ml, respectively, while the model predicted yield was 221 ml and 231 ml, respectively. The experimental yield for jojoba biolubricant with H 2 SO 4 and HCl catalysts was recorded at 232 ml and 248 ml respectively, whereas the model predicted yield was 226 ml and 245 ml, respectively. Based on the analysis of variance (ANOVA) results, it is evident that among the three control factors, the molar ratio significantly influences the yield of both jatropha and jojoba biolubricants, as indicated by a p -value of less than 5%. The percentage contribution of the molar ratio in jatropha biolubricant with H 2 SO 4 and HCl catalysts is found to be 98.99% and 97.2%, respectively. Furthermore, the R 2 value, which exceeds 90%, signifies a strong relationship between the independent and dependent variables. The deviation between the experimental and regression-predicted equations for the yield remains within 2.5% for all combinations of jatropha and jojoba biolubricants. In conclusion, the study successfully prepared biolubricants from jatropha and jojoba-based non-edible vegetable oils and determined the optimal conditions for their production. Graphical abstract
Förderung
- Manipal Academy of Higher Education, Manipal
Zitieren
APA
Uppar, R., Dinesha, P., & Kumar, S. (2024). Yield optimization of nonedible vegetable oil-based bio-lubricant using design of experiments. Environment, Development and Sustainability, 26(11), 29557-29582. https://doi.org/10.1007/s10668-024-04529-1
Vancouver
Uppar R, Dinesha P, Kumar S. Yield optimization of nonedible vegetable oil-based bio-lubricant using design of experiments. Environment, Development and Sustainability. 2024;26(11):29557-29582. doi:10.1007/s10668-024-04529-1
BibTeX
@article{Uppar2024,
author = {Uppar, Rajendra and Dinesha, P. and Kumar, Shiva},
title = {Yield optimization of nonedible vegetable oil-based bio-lubricant using design of experiments},
journal = {Environment, Development and Sustainability},
year = {2024},
volume = {26},
number = {11},
pages = {29557--29582},
doi = {10.1007/s10668-024-04529-1}
}
EUVIMED