EUVIMEDEUVIMED entdecken
Crossref

Using predictive models unravel the potential of titanium oxide–loaded activated carbon for the removal of leachate ammoniacal nitrogen

Kulbir Singh, Rajesh Kumar Lohchab, Vikas Beniwal, Chadetrik Rout, Paramjeet Dhull

Environmental Monitoring and Assessment · 2024

DOI: 10.1007/s10661-024-12689-w ↗

Kurz gefasst

Fachartikel in der Zeitschrift Environmental Monitoring and Assessment, 2024. Verfasst von Kulbir Singh und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Maharishi Markandeshwar (Deemed to Be University), Mullana, Ambala, 133207, Haryana, India. Hauptthemen laut MEDLINE: Titanium, Nitrogen, Water Pollutants, Chemical, Charcoal. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 65 Literaturangaben. Gefördert von: World Bank Group.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The TiO2 nanocomposite efficiency was determined under optimized conditions with activated carbon to remove ammoniacal nitrogen (NH3-N) from the leachate sample. In this work, the facile impregnation and pyrolysis synthesis method was employed to prepare the nanocomposite, and their formation was confirmed using the FESEM, FTIR, XRD, and Raman studies. In contrast, Raman phonon mode intensity ratio ID/IG increases from 2.094 to 2.311, indicating the increase of electronic conductivity and defects with the loading of TiO2 nanoparticles. The experimental optimal conditions for achieving maximum NH3-N removal of 75.8% were found to be a pH of 7, an adsorbent mass of 1.75 mg/L, and a temperature of 30 °C, with a corresponding time of 160 min. The experimental data were effectively fitted with several isotherms (Freundlich, Hill, Khan, Redlich-Peterson, Toth, and Koble-Corrigan). The notably elevated R2 value of 0.99 and a lower ARE % of 14.61 strongly support the assertion that the pseudo-second-order model compromises a superior depiction of the NH3-N reduction process. Furthermore, an effective central composite design (CCD) of response surface methodology (RSM) was employed, and the lower RMSE value, precisely 0.45, demonstrated minimal disparity between the experimentally determined NH3-N removal percentages and those predicted by the model. The subsequent utilization of the desirability function allowed us to attain actual variable experimental conditions.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TitaniumNitrogenWater Pollutants, ChemicalCharcoalAmmoniaAdsorptionModels, ChemicalWaste Disposal, FluidNanocomposites

Stichwörter der Autor:innen

AdsorptionAlmond shellAmmonia nitrogenLeachatePhonon modeTiO2 nanoparticle

Substanzen

TitaniumNitrogenWater Pollutants, ChemicalCharcoalAmmoniatitanium dioxide

Autor:innen und Institutionen

  • Department of Civil Engineering, Maharishi Markandeshwar (Deemed to Be University), Mullana, Ambala, 133207, Haryana, India.
  • Department of Environmental Science & Engineering, Guru Jambheshwar University of Science and Technology, Hisar, 125001, Haryana, India.
  • Department of Environmental Science & Engineering, Guru Jambheshwar University of Science and Technology, Hisar, 125001, Haryana, India. rajeshlohchab@gmail.com.
  • Department of Microbiology, Central University of Haryana, Mahendergarh, 123031, Haryana, India.

Förderung

  • World Bank Group

Zitieren

APA

Singh, K., Lohchab, R. K., Beniwal, V., Rout, C., & Dhull, P. (2024). Using predictive models unravel the potential of titanium oxide–loaded activated carbon for the removal of leachate ammoniacal nitrogen. Environmental Monitoring and Assessment. https://doi.org/10.1007/s10661-024-12689-w

Vancouver

Singh K, Lohchab RK, Beniwal V, Rout C, Dhull P. Using predictive models unravel the potential of titanium oxide–loaded activated carbon for the removal of leachate ammoniacal nitrogen. Environmental Monitoring and Assessment. 2024. doi:10.1007/s10661-024-12689-w

BibTeX
@article{Singh2024,
  author = {Singh, Kulbir and Lohchab, Rajesh Kumar and Beniwal, Vikas and Rout, Chadetrik and Dhull, Paramjeet},
  title = {Using predictive models unravel the potential of titanium oxide–loaded activated carbon for the removal of leachate ammoniacal nitrogen},
  journal = {Environmental Monitoring and Assessment},
  year = {2024},
  doi = {10.1007/s10661-024-12689-w}
}
Kostenlos starten →