Sulfate removal from acid mine drainage using adsorbents derived from drinking water treatment plant residue: synthesis, characterization and comprehensive analysis
Environmental Geochemistry and Health · 2025
DOI: 10.1007/s10653-025-02667-7 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environmental Geochemistry and Health, 2025. Verfasst von Satish Chandra Bhuyan und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mining Engineering, National Institute of Technology, Rourkela, 769008, India. 520MN6002@nitrkl.ac.in. Hauptthemen laut MEDLINE: Sulfates, Water Pollutants, Chemical, Mining, Water Purification. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 80 Literaturangaben.
Abstract (Originalsprache)
This paper focuses on the utilization of drinking water treatment plant residue (DWTPR) for sulfate removal from synthetic and real acid mine drainage (AMD) from the mine sumps of an Opencast Project (OCP) in Ib Valley Coalfields, MCL Odisha, India, and compares it with modified DWTPR. The physicochemical behavior of the adsorbents was analyzed by SEM, EDS, XRD, FTIR, BET, and pHZPC. The optimum parameter for sulfate removal was obtained from varying initial concentrations, dosages, contact time, and pH of the solution. The findings showed that the modification introduced some new functional groups and altered crystallinity. The pHzpc of raw DWTPR, EDTA-DWTPR, and Chitosan-DWTPR were found to be 6.4, 7.1, and 8.8, respectively. The maximum sulfate removal (77.93%) was achieved using chitosan-modified DWTPR at pH 7.1 with a dosage of 5 g/100 mL and a contact time of 300 min in synthetic sulfate solution (Solution A). Chitosan-DWTPR removed 77.93%, 71.68%, and 62.76% of sulfate from Sump 1, Sump 2, and simulated AMD solution (Solution B), respectively. Additionally, up to 90% of other pollutants (Fe, Mn, Cu, Ni, and Al) were removed from both synthetic and real AMD samples. The Langmuir isotherm and pseudo-second-order kinetic model accurately described the experimental data. The thermodynamic analysis revealed that the process was non-spontaneous, exothermic, and associated with low randomness. Both raw and chitosan-modified DWTPR demonstrated remarkable neutralization ability for AMD. The study highlighted the significant role of chitosan in enhancing adsorbent properties for effective sulfate removal and mine effluent neutralization. Adsorption and chemical precipitation were identified as the primary mechanisms for the removal of sulfate and other pollutants.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Mining Engineering, National Institute of Technology, Rourkela, 769008, India. 520MN6002@nitrkl.ac.in.
- Department of Mining Engineering, National Institute of Technology, Rourkela, 769008, India.
Zitieren
APA
Bhuyan, S. C., Behera, P., & Sahu, H. B. (2025). Sulfate removal from acid mine drainage using adsorbents derived from drinking water treatment plant residue: synthesis, characterization and comprehensive analysis. Environmental Geochemistry and Health. https://doi.org/10.1007/s10653-025-02667-7
Vancouver
Bhuyan SC, Behera P, Sahu HB. Sulfate removal from acid mine drainage using adsorbents derived from drinking water treatment plant residue: synthesis, characterization and comprehensive analysis. Environmental Geochemistry and Health. 2025. doi:10.1007/s10653-025-02667-7
BibTeX
@article{Bhuyan2025,
author = {Bhuyan, Satish Chandra and Behera, Pallavi and Sahu, Himanshu Bhushan},
title = {Sulfate removal from acid mine drainage using adsorbents derived from drinking water treatment plant residue: synthesis, characterization and comprehensive analysis},
journal = {Environmental Geochemistry and Health},
year = {2025},
doi = {10.1007/s10653-025-02667-7}
}
EUVIMED