A needle-free bubble injector enabling depth-controlled isotropic and anisotropic perforation using electrically induced bubbles and heat generated by electric discharge
Biomedical Microdevices · 2026
DOI: 10.1007/s10544-026-00819-9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomedical Microdevices, 2026. Verfasst von Yuudai Aokusa und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka, 819-0395, Japan. Hauptthemen laut MEDLINE: Electricity, Hot Temperature, Needles, Drug Delivery Systems. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: JST Moonshot R&D, JSPS KAKENHI.
Abstract (Originalsprache)
Transdermal drug delivery is advantageous in administering therapeutic agents, such as many vaccines and macromolecular drugs that do not remain in the body after oral ingestion. Needle-free injectors have been developed as an alternative to the existing syringes for drug delivery; however, because of the difficulties in controlling the jet flow during perforation, their practical use remains a challenge. Herein, we propose a novel needle-free injector. By controlling the distance between the target and the device, the injector performs (i) isotropic perforation using electrically induced bubbles or (ii) anisotropic perforation using localized heating generated by electric discharge at the device tip. Furthermore, by controlling the applied voltage, the size of the electrically induced bubble and the speed of the microjet generated by bubble collapse can be regulated. As a result, the perforation depth was controlled in the range of 0.7-1.1 mm, which is difficult to achieve using conventional needle-free injectors. These results indicate the potential of the proposed method for precise and minimally invasive transdermal drug delivery.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka, 819-0395, Japan.
- Department of Mechanical Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka, 819-0395, Japan. yoko@mech.kyushu-u.ac.jp.
Förderung
- JST Moonshot R&D
- JSPS KAKENHI
Zitieren
APA
Aokusa, Y., Ota, N., Miura, S., Nakahigashi, M., Minami, Y., & Yamanishi, Y. (2026). A needle-free bubble injector enabling depth-controlled isotropic and anisotropic perforation using electrically induced bubbles and heat generated by electric discharge. Biomedical Microdevices. https://doi.org/10.1007/s10544-026-00819-9
Vancouver
Aokusa Y, Ota N, Miura S, Nakahigashi M, Minami Y, Yamanishi Y. A needle-free bubble injector enabling depth-controlled isotropic and anisotropic perforation using electrically induced bubbles and heat generated by electric discharge. Biomedical Microdevices. 2026. doi:10.1007/s10544-026-00819-9
BibTeX
@article{Aokusa2026,
author = {Aokusa, Yuudai and Ota, Nobutoshi and Miura, Shigeaki and Nakahigashi, Mayu and Minami, Yuma and Yamanishi, Yoko},
title = {A needle-free bubble injector enabling depth-controlled isotropic and anisotropic perforation using electrically induced bubbles and heat generated by electric discharge},
journal = {Biomedical Microdevices},
year = {2026},
doi = {10.1007/s10544-026-00819-9}
}
EUVIMED