EUVIMEDEUVIMED entdecken
LeitlinieOpen Access · CC BY 4.0

Sliding joint masonry infill with deformable contact material: interaction with the RC frame and design guidelines

Simone Pelucco, Riccardo R. Milanesi, Paolo Morandi, Valentino Bolis, Andreas Stavridis, Guido Magenes, Marco Preti

Bulletin of Earthquake Engineering · 2026-08 · 24 (8) · 6665-6699

DOI: 10.1007/s10518-026-02492-y ↗

Kurz gefasst

Leitlinie in der Zeitschrift Bulletin of Earthquake Engineering, online erschienen am 22.05.2026. Verfasst von Simone Pelucco und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Università degli Studi di Brescia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The seismic vulnerability of traditionally constructed masonry infilled frames has been repeatedly highlighted in post-event surveys, as well as by experimental and numerical studies. Infill walls with sliding joints can improve the seismic response of these structures. The paper describes some design equations derived from a parametric numerical analysis focusing on the interaction between the RC frame and the masonry infill with sliding joints. A previously proposed analytical model, able to predict the lateral strength contribution and the column shear overload due to the infill-frame interaction, is here extended to widen its field of application to walls with column-to-infill contact material characterized by and elastic response instead of an elastic-plastic one. A previously validated finite element modelling method is used to conduct a parametric study examining the role of the key design parameters of ductile masonry infill walls that implement sliding joints. The main model parameters are calibrated using data obtained from a previous comprehensive experimental campaign. A comparison of numerical and experimental results is also reported. The influence of different infill-frame contact material stiffnesses is analysed together with other design parameters, such as the bay length, the masonry properties, the layout of sliding and contact joints.

Förderung

  • Università degli Studi di Brescia

Zitieren

APA

Pelucco, S., Milanesi, R. R., Morandi, P., Bolis, V., Stavridis, A., Magenes, G., & Preti, M. (2026). Sliding joint masonry infill with deformable contact material: interaction with the RC frame and design guidelines. Bulletin of Earthquake Engineering, 24(8), 6665-6699. https://doi.org/10.1007/s10518-026-02492-y

Vancouver

Pelucco S, Milanesi RR, Morandi P, Bolis V, Stavridis A, Magenes G, et al. Sliding joint masonry infill with deformable contact material: interaction with the RC frame and design guidelines. Bulletin of Earthquake Engineering. 2026;24(8):6665-6699. doi:10.1007/s10518-026-02492-y

BibTeX
@article{Pelucco2026,
  author = {Pelucco, Simone and Milanesi, Riccardo R. and Morandi, Paolo and Bolis, Valentino and Stavridis, Andreas and Magenes, Guido and Preti, Marco},
  title = {Sliding joint masonry infill with deformable contact material: interaction with the RC frame and design guidelines},
  journal = {Bulletin of Earthquake Engineering},
  year = {2026},
  volume = {24},
  number = {8},
  pages = {6665--6699},
  doi = {10.1007/s10518-026-02492-y}
}
Kostenlos starten →