EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Seismic loss assessment of direct-DBD platform-type cross-laminated timber shear wall systems using FEMA P-58 methodology

Hamed Dadkhah, Cristiano Loss iD

Bulletin of Earthquake Engineering · 2024-10 · 22 (13) · 6379-6417

DOI: 10.1007/s10518-024-01998-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bulletin of Earthquake Engineering, online erschienen am 16.08.2024. Verfasst von Hamed Dadkhah und 1 weiteren Autor:innen. Beteiligte Einrichtung: Sustainable Engineered Structural Solutions Laboratory, Department of Wood Science, University of British Columbia, 2424 Main Mall, Vancouver, BC V6T…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An efficient design method should provide practitioners with a means for sizing timber buildings to meet specific performance levels against estimated earthquake intensities. Displacement and energy design considerations in force-based design (FBD) procedures are not as precise as intended in complex systems, such as mid- to high-rise timber buildings. The main aim of this study is to tailor the direct displacement-based design (D-DBD) classical framework to platform-type cross-laminated timber (CLT) shear wall structural systems and validate their performance for low-rise to high-rise timber mixed-use buildings. A comparison with results obtained via the FBD analyses is also provided. To this end, timber buildings with heights of 4, 8 and 12 stories are designed via the D-DBD and FBD methods. The seismic performance of platform-type CLT wall buildings is assessed in terms of the repair cost, repair time and casualty rate using FEMA P-58 methodology. The seismic response of CLT shear walls shows that the FBD method may lead to an expensive overdesign, especially in high-rise platform-type CLT walls. Conversely, the D-DBD method develops structural systems which can sustain a comparable level of damage from low- to high-rise platform-type CLT walls. Although the seismic loss assessment of buildings shows slightly better performance for the FBD method than the D-DBD method, it is worth noting that the D-DBD method does not lead to an unsafe building. Consequently, the D-DBD method sounds like a proper alternative approach for designing the CLT shear walls to achieve target performance levels without requiring a premium upfront cost.

Schlagwörter

Stichwörter der Autor:innen

Cross-laminated timberDirect displacement-based designFEMA P58Force-based designFragility analysisSeismic repair cost

Autor:innen und Institutionen

  • Sustainable Engineered Structural Solutions Laboratory, Department of Wood Science, University of British Columbia, 2424 Main Mall, Vancouver, BC V6T 1Z4 Canada.
  • Department of Civil Engineering, University of Mohaghegh Ardabili, Ardabil, Iran.

ORCID-Profile: Cristiano Loss

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Dadkhah, H., & Loss, C. (2024). Seismic loss assessment of direct-DBD platform-type cross-laminated timber shear wall systems using FEMA P-58 methodology. Bulletin of Earthquake Engineering, 22(13), 6379-6417. https://doi.org/10.1007/s10518-024-01998-7

Vancouver

Dadkhah H, Loss C. Seismic loss assessment of direct-DBD platform-type cross-laminated timber shear wall systems using FEMA P-58 methodology. Bulletin of Earthquake Engineering. 2024;22(13):6379-6417. doi:10.1007/s10518-024-01998-7

BibTeX
@article{Dadkhah2024,
  author = {Dadkhah, Hamed and Loss, Cristiano},
  title = {Seismic loss assessment of direct-DBD platform-type cross-laminated timber shear wall systems using FEMA P-58 methodology},
  journal = {Bulletin of Earthquake Engineering},
  year = {2024},
  volume = {22},
  number = {13},
  pages = {6379--6417},
  doi = {10.1007/s10518-024-01998-7}
}
Kostenlos starten →