EUVIMEDEUVIMED entdecken
Crossref

Systematic Investigation of the Low Temperature Compressive Properties and Damage Mechanisms of 3D Woven Tubular Composites with Diverse Weaving Architectures

Xin Sun, Yiwei Ouyang, Xiaoke Huang, Xiaonan Wang, Yiran Han, Duyan Zhang, Yang Liu, Xiaozhou Gong

Applied Composite Materials · 2026-06 · 33 (3)

DOI: 10.1007/s10443-026-10475-0 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Composite Materials, online erschienen am 09.05.2026. Verfasst von Xin Sun und 7 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Gefördert von: the scientific research project of Hubei provincial department of education,China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focused on three typical three-dimensional woven tubular composites (3DWTCs) with different weaving architectures, namely through orthogonal (TO), shallow cross-linked (SCL), and shallow-crossed curved joint (SCCJ), aiming to clarify their low-temperature compressive performance and failure mechanisms. Axial and lateral compressive tests were conducted over a temperature range of 20 °C to -60 °C. The results indicated that the compressive properties of all 3DWTCs were significantly improved with decreasing temperature: when the temperature decreased from 20 °C to -60 °C, the axial ultimate stress of TO increased by 71.89%, the compressive modulus of SCCJ rose by 94.17%, and the lateral energy absorption of SCL improved by 30.52%. Structurally, TO exhibited the best axial compressive performance, followed by SCL and SCCJ, while SCL outperformed the other two weaving architectures in lateral compression. Low temperatures induced a ductile-to-brittle transition in 3DWTCs, with TO showing concentrated crack distribution and SCCJ presenting dispersed microcracks; the main micro-damage mechanisms included matrix cracking, fiber/matrix interfacial cracking, fiber pull-out, and resin embrittlement. The findings provide valuable guidance for the structural optimization, performance design, and safety evaluation of low-temperature-resistant lightweight components in extreme engineering fields.

Förderung

  • the scientific research project of Hubei provincial department of education,China

Zitieren

APA

Sun, X., Ouyang, Y., Huang, X., Wang, X., Han, Y., Zhang, D., Liu, Y., & Gong, X. (2026). Systematic Investigation of the Low Temperature Compressive Properties and Damage Mechanisms of 3D Woven Tubular Composites with Diverse Weaving Architectures. Applied Composite Materials, 33(3). https://doi.org/10.1007/s10443-026-10475-0

Vancouver

Sun X, Ouyang Y, Huang X, Wang X, Han Y, Zhang D, et al. Systematic Investigation of the Low Temperature Compressive Properties and Damage Mechanisms of 3D Woven Tubular Composites with Diverse Weaving Architectures. Applied Composite Materials. 2026;33(3). doi:10.1007/s10443-026-10475-0

BibTeX
@article{Sun2026,
  author = {Sun, Xin and Ouyang, Yiwei and Huang, Xiaoke and Wang, Xiaonan and Han, Yiran and Zhang, Duyan and Liu, Yang and Gong, Xiaozhou},
  title = {Systematic Investigation of the Low Temperature Compressive Properties and Damage Mechanisms of 3D Woven Tubular Composites with Diverse Weaving Architectures},
  journal = {Applied Composite Materials},
  year = {2026},
  volume = {33},
  number = {3},
  doi = {10.1007/s10443-026-10475-0}
}
Kostenlos starten →