EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multidirectional Optical Bone Densitometry Using a Simulation-Based Machine Learning Model: Experimental Validation with Bone Phantoms

Shigeo M Tanaka, Kaito Yoshikawa

Annals of Biomedical Engineering · 02.07.2026

DOI: 10.1007/s10439-026-04258-8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Annals of Biomedical Engineering, online erschienen am 02.07.2026. Verfasst von Shigeo M Tanaka und 1 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Frontier Engineering, Institute of Science and Engineering, Kanazawa University, Kakumamachi, Kanazawa, Ishikawa, 920-1192, Japan. shigeo@…. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Ministry of Education, Culture, Sports, Science, and Technology (MEXT), Japan, Kanazawa University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

While the multidirectional optical bone densitometry approach, originally proposed based on simulation, has been previously reported, its experimental validation has not yet been demonstrated. This study addresses this gap by validating the method using bone phantoms.

Methods

These phantoms were fabricated with Intralipos, agarose, and bovine cortical bone fragments. By varying the mixing ratio of cortical bone fragments, phantoms with different bone densities were prepared. Near-infrared laser light with a wavelength of 850 nm was directed onto the phantoms from three directions, and the resulting backward, lateral, and forward light intensity distributions on the phantom surface were recorded. Directional light intensity values were extracted from these distributions and used as features for the simulation-based machine learning model to predict bone density.

Results

Linear regression between the predicted and reference bone densities yielded an r 2 of 0.85.

Conclusion

These findings demonstrate the feasibility of the proposed method as a proof-of-concept validation and suggest a possible direction for future development of optical bone density assessment methods.

Schlagwörter

Stichwörter der Autor:innen

Bone mineral densityMachine learningOptical bone densitometryOsteoporosis screeningSimulation

Autor:innen und Institutionen

  • Faculty of Frontier Engineering, Institute of Science and Engineering, Kanazawa University, Kakumamachi, Kanazawa, Ishikawa, 920-1192, Japan. shigeo@se.kanazawa-u.ac.jp.
  • Division of Frontier Engineering, Graduate School of Natural Science and Technology, Kanazawa University, Kakumamachi, Kanazawa, Ishikawa, 920-1192, Japan.

Förderung

  • The Ministry of Education, Culture, Sports, Science, and Technology (MEXT), Japan
  • Kanazawa University

Zitieren

APA

Tanaka, S. M., & Yoshikawa, K. (2026). Multidirectional Optical Bone Densitometry Using a Simulation-Based Machine Learning Model: Experimental Validation with Bone Phantoms. Annals of Biomedical Engineering. https://doi.org/10.1007/s10439-026-04258-8

Vancouver

Tanaka SM, Yoshikawa K. Multidirectional Optical Bone Densitometry Using a Simulation-Based Machine Learning Model: Experimental Validation with Bone Phantoms. Annals of Biomedical Engineering. 2026. doi:10.1007/s10439-026-04258-8

BibTeX
@article{Tanaka2026,
  author = {Tanaka, Shigeo M and Yoshikawa, Kaito},
  title = {Multidirectional Optical Bone Densitometry Using a Simulation-Based Machine Learning Model: Experimental Validation with Bone Phantoms},
  journal = {Annals of Biomedical Engineering},
  year = {2026},
  doi = {10.1007/s10439-026-04258-8}
}
Kostenlos starten →