EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Computational Framework for Simulating Patient-Specific TMJ Biomechanics Using a Combined Multibody Dynamics and Finite Element Approach

Farhad Ahmadi, Shuchun Sun, Jichao Zhao, Jian Chen, Marshall B Wilson, Brooke Damon, Yongren Wu, Konstantinia Almpani, Rachel Chung, Priyam Jani, Peng Chen, Elizabeth H Slate und 3 weitere

Annals of Biomedical Engineering · 2026-09 · 54 (9) · 3074-3087

DOI: 10.1007/s10439-026-04020-0 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Annals of Biomedical Engineering, online erschienen am 02.03.2026. Verfasst von Farhad Ahmadi und 14 weiteren Autor:innen. Beteiligte Einrichtung: Clemson-MUSC Joint Bioengineering Program, Department of Bioengineering, Clemson University, Clemson, SC, USA. Hauptthemen laut MEDLINE: Temporomandibular Joint, Models, Biological. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIDCR NIH HHS, NIGMS NIH HHS, NIBIB NIH HHS.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

Biomechanical parameters of the temporomandibular joint (TMJ), such as joint contact forces and intra-articular stresses, are suggested to contribute to the development of temporomandibular joint disorders, but are impractical to measure. In this study, we present a computational framework for evaluating these parameters by integrating a function assessment system and a patient-specific modeling approach.

Methods

The pipeline consists of acquiring patients' functional and morphological data and developing combined multibody dynamics and finite-element (MBD-FE) models for simulating their specific biting tasks. We demonstrate the approach in a pre-/post-orthognathic surgery scenario and present the measured and simulated outputs.

Results

In a three-patient cohort of one Class I control and two surgical patients (one Class II and one Class III patient), surgery was accompanied by functional changes such as increased bite force capacity and shifts in muscle-usage during unilateral first premolar clenching that brought the surgical cases closer to the control case. Also, morphological measurements showed postoperative adaptations in condylar size and joint space. Simulations demonstrated that contralateral joint forces exceeded ipsilateral forces during unilateral biting and predicted regions of concentrated disc stress that coincided with regions of reduced joint gap and poorer articular congruency, highlighting how morphology-function interactions shape local mechanics.

Conclusion

By unifying individualized functional inputs and subject-specific geometries, the framework provides a practical basis for patient-tailored assessment of biomechanical parameters and decision support in TMJ care.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Temporomandibular JointModels, BiologicalHumansFinite Element AnalysisFemaleBiomechanical PhenomenaBite ForceComputer SimulationMaleAdult

Stichwörter der Autor:innen

Computer simulationOrthognathic surgeryPatient-specific modelingTemporomandibular joint

Autor:innen und Institutionen

  • Clemson-MUSC Joint Bioengineering Program, Department of Bioengineering, Clemson University, Clemson, SC, USA.
  • Department of Oral Health Sciences, Medical University of South Carolina, Charleston, SC, USA.
  • Department of Orthopaedics, Medical University of South Carolina, Charleston, SC, USA.
  • Craniofacial Anomalies and Regeneration Section, National Institute of Dental and Craniofacial Research (NIDCR), NIH, Bethesda, MD, USA.
  • Department of Statistics, Florida State University, Tallahassee, FL, USA.
  • Competence Center Artificial Intelligence in Dentistry, University Clinic of Dentistry, Medical University of Vienna, Vienna, Austria. benedikt.sagl@meduniwien.ac.at.

Förderung

  • NIDCR NIH HHS
  • NIGMS NIH HHS
  • NIBIB NIH HHS
  • National Institute of Dental and Craniofacial Research
  • National Institute of General Medical Sciences
  • Clemson University

Zitieren

APA

Ahmadi, F., Sun, S., Zhao, J., Chen, J., Wilson, M. B., Damon, B., Wu, Y., Almpani, K., Chung, R., Jani, P., Chen, P., Slate, E. H., Lee, J. S., Sagl, B., & Yao, H. (2026). A Computational Framework for Simulating Patient-Specific TMJ Biomechanics Using a Combined Multibody Dynamics and Finite Element Approach. Annals of Biomedical Engineering, 54(9), 3074-3087. https://doi.org/10.1007/s10439-026-04020-0

Vancouver

Ahmadi F, Sun S, Zhao J, Chen J, Wilson MB, Damon B, et al. A Computational Framework for Simulating Patient-Specific TMJ Biomechanics Using a Combined Multibody Dynamics and Finite Element Approach. Annals of Biomedical Engineering. 2026;54(9):3074-3087. doi:10.1007/s10439-026-04020-0

BibTeX
@article{Ahmadi2026,
  author = {Ahmadi, Farhad and Sun, Shuchun and Zhao, Jichao and Chen, Jian and Wilson, Marshall B and Damon, Brooke and Wu, Yongren and Almpani, Konstantinia and Chung, Rachel and Jani, Priyam and Chen, Peng and Slate, Elizabeth H and Lee, Janice S and Sagl, Benedikt and Yao, Hai},
  title = {A Computational Framework for Simulating Patient-Specific TMJ Biomechanics Using a Combined Multibody Dynamics and Finite Element Approach},
  journal = {Annals of Biomedical Engineering},
  year = {2026},
  volume = {54},
  number = {9},
  pages = {3074--3087},
  doi = {10.1007/s10439-026-04020-0}
}
Kostenlos starten →