Considering the Influence of Coronary Motion on Artery-Specific Biomechanics Using Fluid–Structure Interaction Simulation
Annals of Biomedical Engineering · 2023-09 · 51 (9) · 1950-1964
DOI: 10.1007/s10439-023-03214-0 ↗Kurz gefasst
Fachartikel in der Zeitschrift Annals of Biomedical Engineering, online erschienen am 12.07.2023. Verfasst von Nicholas A T Fogell und 11 weiteren Autor:innen. Beteiligte Einrichtung: National Heart and Lung Institute, Imperial College London, Guy Scadding Building, Cale Street, London, SW3 6LY, UK. n.fogell@imperial.ac.uk. Hauptthemen laut MEDLINE: Models, Cardiovascular, Coronary Vessels. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: British Heart Foundation, Medical Research Council.
Abstract (Originalsprache)
The endothelium in the coronary arteries is subject to wall shear stress and vessel wall strain, which influences the biology of the arterial wall. This study presents vessel-specific fluid–structure interaction (FSI) models of three coronary arteries, using directly measured experimental geometries and boundary conditions. FSI models are used to provide a more physiologically complete representation of vessel biomechanics, and have been extended to include coronary bending to investigate its effect on shear and strain. FSI both without- and with-bending resulted in significant changes in all computed shear stress metrics compared to CFD ( p = 0.0001). Inclusion of bending within the FSI model produced highly significant changes in Time Averaged Wall Shear Stress (TAWSS) + 9.8% LAD, + 8.8% LCx, − 2.0% RCA; Oscillatory Shear Index (OSI) + 208% LAD, 0% LCx, + 2600% RCA; and transverse wall Shear Stress (tSS) + 180% LAD, + 150% LCx and + 200% RCA (all p < 0.0001). Vessel wall strain was homogenous in all directions without-bending but became highly anisotropic under bending. Changes in median cyclic strain magnitude were seen for all three vessels in every direction. Changes shown in the magnitude and distribution of shear stress and wall strain suggest that bending should be considered on a vessel-specific basis in analyses of coronary artery biomechanics.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- National Heart and Lung Institute, Imperial College London, Guy Scadding Building, Cale Street, London, SW3 6LY, UK. n.fogell@imperial.ac.uk.
- National Heart and Lung Institute, Imperial College London, Guy Scadding Building, Cale Street, London, SW3 6LY, UK.
- Simulia, Dassault Systemes UK Ltd, Knutsford, UK.
- Amsterdam UMC, Department of Biomedical Engineering and Physics, University of Amsterdam, Amsterdam, The Netherlands.
- Mechanical & Materials Engineering, University of Nebraska-Lincoln, Lincoln, USA.
- School for Material Sciences and Engineering, Queen Mary University, London, UK.
Förderung
- British Heart Foundation
- Medical Research Council
Zitieren
APA
Fogell, N. A. T., Patel, M., Yang, P., Ruis, R. M., Garcia, D. B., Naser, J., Savvopoulos, F., Davies Taylor, C., Post, A. L., Pedrigi, R. M., de Silva, R., & Krams, R. (2023). Considering the Influence of Coronary Motion on Artery-Specific Biomechanics Using Fluid–Structure Interaction Simulation. Annals of Biomedical Engineering, 51(9), 1950-1964. https://doi.org/10.1007/s10439-023-03214-0
Vancouver
Fogell NAT, Patel M, Yang P, Ruis RM, Garcia DB, Naser J, et al. Considering the Influence of Coronary Motion on Artery-Specific Biomechanics Using Fluid–Structure Interaction Simulation. Annals of Biomedical Engineering. 2023;51(9):1950-1964. doi:10.1007/s10439-023-03214-0
BibTeX
@article{Fogell2023,
author = {Fogell, Nicholas A T and Patel, Miten and Yang, Pan and Ruis, Roosje M and Garcia, David B and Naser, Jarka and Savvopoulos, Fotios and Davies Taylor, Clint and Post, Anouk L and Pedrigi, Ryan M and de Silva, Ranil and Krams, Rob},
title = {Considering the Influence of Coronary Motion on Artery-Specific Biomechanics Using Fluid–Structure Interaction Simulation},
journal = {Annals of Biomedical Engineering},
year = {2023},
volume = {51},
number = {9},
pages = {1950--1964},
doi = {10.1007/s10439-023-03214-0}
}
EUVIMED