Chemical characterisation is rough: the impact of topography and measurement parameters on energy-dispersive X-ray spectroscopy in biominerals
Facies · 2022-04 · 68 (2)
DOI: 10.1007/s10347-022-00645-4 ↗Kurz gefasst
Fachartikel in der Zeitschrift Facies, online erschienen am 24.03.2022. Verfasst von Bryan Shirley und 1 weiteren Autor:innen. Die Arbeit wurde bisher 47-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, Friedrich-Alexander-Universität Erlangen-Nürnberg.
Abstract (Originalsprache)
Energy dispersive X-ray microscopy (EDX) is a widely available, inexpensive method of characterizing the in-situ elemental composition of samples in Earth and life sciences. Common protocols and textbooks focussing on material sciences address EDX analysis of metallic samples that can be polished perfectly, whereas geoscientists often investigate specimens with prominent topography and composed of light, difficult to resolve elements. This is further compounded by the scarcity of literature surrounding the methodology of SEM–EDX in the field of palaeontology, leading to common misinterpretations and artefacts during data acquisition. Here, the common errors in elemental composition obtained with EDX arising from surface topography and from parameters subject to user decisions are quantified. As a model, fossil bioapatite (conodonts) and abiotic Durango apatite are used. It is shown that even microscale topography can distort measured composition by up to 34%, whereas topographic features such as tilt with respect to the electron beam lead to differences of up to 85%. Working distance was not the most important parameter affecting the results and led to differences in composition of up to 13%, whereas the choice of standard and its levelling with the sample surface led to inaccuracy reaching 33%. EDX results can be also affected by beam damage and the effects of acceleration voltage on sample acquisition and resolution are quantified. An estimate is provided of the severity of errors associated with samples which cannot satisfy preparation requirements for EDX fully, such as holotypes, and with user decisions. Using a palaeontological example, recommendations are offered for the best parameters and the relative importance of error sources are assessed.
Förderung
- Deutsche Forschungsgemeinschaft
- Friedrich-Alexander-Universität Erlangen-Nürnberg
Zitieren
APA
Shirley, B., & Jarochowska, E. (2022). Chemical characterisation is rough: the impact of topography and measurement parameters on energy-dispersive X-ray spectroscopy in biominerals. Facies, 68(2). https://doi.org/10.1007/s10347-022-00645-4
Vancouver
Shirley B, Jarochowska E. Chemical characterisation is rough: the impact of topography and measurement parameters on energy-dispersive X-ray spectroscopy in biominerals. Facies. 2022;68(2). doi:10.1007/s10347-022-00645-4
BibTeX
@article{Shirley2022,
author = {Shirley, Bryan and Jarochowska, Emilia},
title = {Chemical characterisation is rough: the impact of topography and measurement parameters on energy-dispersive X-ray spectroscopy in biominerals},
journal = {Facies},
year = {2022},
volume = {68},
number = {2},
doi = {10.1007/s10347-022-00645-4}
}
EUVIMED