EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A biphasic modeling framework for arterial compressibility under steady axisymmetric deformation

Takeo Fujiwara, Shukei Sugita, Shigeo Wada, Tomohiro Otani

Biomechanics and Modeling in Mechanobiology · 2026-06 · 25 (3)

DOI: 10.1007/s10237-026-02082-6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomechanics and Modeling in Mechanobiology, online erschienen am 05.06.2026. Verfasst von Takeo Fujiwara und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Science and Bioengineering, Graduate School of Engineering Science, The University of Osaka, 1-3, Machikaneyamacho, Toyonaka…. Hauptthemen laut MEDLINE: Arteries, Models, Cardiovascular, Compressive Strength. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Japan Society for the Promotion of Science, Ministry of Education, Culture, Sports, Science and Technology, The University of Osaka.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Arterial walls contain large amounts of water and have conventionally been modeled as incompressible. However, recent experimental studies have reported non-negligible arterial compressibility, with volumetric changes on the order of 10% or larger depending on loading conditions. To clarify the mechanical origin and its implications, this study develops a biphasic modeling framework for arterial mechanics, in which apparent compressibility arises from interstitial fluid transfer within the arterial wall. The arterial wall is modeled as a saturated biphasic material consisting of a solid skeleton and interstitial fluid, in which the solid skeleton is modeled as an anisotropic, hyperelastic material with macroscopic volumetric deformability, and the fluid motion is governed by Darcy’s law. Assuming steady, axisymmetric plane-strain deformation, the resulting nonlinear mechanical equilibrium is reduced to a one-dimensional radial boundary-value problem and solved numerically using a finite element method. Systematic parametric analyses demonstrate that radial and circumferential deformations, as well as the resulting volumetric changes, are consistent with experimentally observed mean values, with deviations within 2% under the same loading conditions. Such volumetric expansion, driven by the hydrostatic pressure of the interstitial fluid, induces tensile stress components in the radial direction within the solid skeleton, revealing a mechanical consequence of fluid–solid interactions that is not directly accessible from apparent deformation measures alone. These findings suggest that biphasic modeling provides a mechanically interpretable framework for examining arterial wall responses in regimes where fluid–solid interactions are relevant.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ArteriesModels, CardiovascularCompressive StrengthStress, MechanicalBiomechanical PhenomenaFinite Element AnalysisComputer SimulationElasticityExtracellular FluidHumansPressure

Stichwörter der Autor:innen

ArteryBiphasic modelCompressibilityInterstitial fluidPressure-inflation test

Autor:innen und Institutionen

  • Department of Mechanical Science and Bioengineering, Graduate School of Engineering Science, The University of Osaka, 1-3, Machikaneyamacho, Toyonaka, 560-8531, Osaka, Japan.
  • Department of Electrical and Mechanical Engineering, Graduate School of Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya, 466-8555, Aichi, Japan.
  • Department of Mechanical Science and Bioengineering, Graduate School of Engineering Science, The University of Osaka, 1-3, Machikaneyamacho, Toyonaka, 560-8531, Osaka, Japan. otani.tomohiro.es@osaka-u.ac.jp.

Förderung

  • Japan Society for the Promotion of Science
  • Ministry of Education, Culture, Sports, Science and Technology
  • The University of Osaka

Zitieren

APA

Fujiwara, T., Sugita, S., Wada, S., & Otani, T. (2026). A biphasic modeling framework for arterial compressibility under steady axisymmetric deformation. Biomechanics and Modeling in Mechanobiology, 25(3). https://doi.org/10.1007/s10237-026-02082-6

Vancouver

Fujiwara T, Sugita S, Wada S, Otani T. A biphasic modeling framework for arterial compressibility under steady axisymmetric deformation. Biomechanics and Modeling in Mechanobiology. 2026;25(3). doi:10.1007/s10237-026-02082-6

BibTeX
@article{Fujiwara2026,
  author = {Fujiwara, Takeo and Sugita, Shukei and Wada, Shigeo and Otani, Tomohiro},
  title = {A biphasic modeling framework for arterial compressibility under steady axisymmetric deformation},
  journal = {Biomechanics and Modeling in Mechanobiology},
  year = {2026},
  volume = {25},
  number = {3},
  doi = {10.1007/s10237-026-02082-6}
}
Kostenlos starten →