Mechanical behavior of human breast tissues: ex vivo and in silico characterization
Biomechanics and Modeling in Mechanobiology · 2026-04 · 25 (2)
DOI: 10.1007/s10237-026-02045-x ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomechanics and Modeling in Mechanobiology, online erschienen am 30.03.2026. Verfasst von Ana Margarida Teixeira und 6 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Engineering of University of Porto, Porto, Portugal. Hauptthemen laut MEDLINE: Breast, Computer Simulation. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e a Tecnologia.
Abstract (Originalsprache)
To study the mechanics of a biological tissue is crucial to understand its behavior under a variety of realistic loading conditions. In particular, an accurate estimation of the mechanical properties of breast tissues is essential to enhance current diagnostic techniques, such as mammography, and to improve clinical treatments, including tissue engineering approaches. This study focuses on the mechanical characterization of human breast tissues, harvested from women who underwent a mammary reduction surgery. Ex vivo experiments, consisted in indentation tests, were performed to determine the elastic properties. Additionally, using inverse finite element analysis, the hyperelastic properties were obtained for the Yeoh and Ogden (N = 3) constitutive models. The samples were grouped based on the characteristics of the female population (i.e., age, body mass index and menopausal status) and according to the breast side (tissue sample site). Significant differences in the Young’s modulus were only observed in association with age and menopausal status, in the first linear region (3.75–11.5% strain) of the experimental curve. In the second linear region (22.5–30% strain), although samples presented a higher stiffness, no significant differences were observed. Regarding the hyperelastic properties, Yeoh and Ogden (N = 3) models accurately fit the experimental data, presenting errors lower than 3.26% and 3.86%, respectively. In this work, the model developed successfully converged with a 3 mm of indentation (corresponding to 30% of deformation), enabling reliable analysis in the large deformations domain. The findings of this study provide valuable insights that can contribute to future clinical applications and research, including improvements in diagnostic techniques, treatments and esthetic reconstructions.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Engineering of University of Porto, Porto, Portugal.
- Associated Laboratory of Energy, Transports and Aeronautics (LAETA), Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI), Porto, Portugal.
- Gaia/Espinho Hospital Center: Plastic, Reconstructive, Craniomaxillofacial, Hand Surgery Service and Microsurgery Unit, Vila Nova de Gaia, Portugal.
- Aragonese Foundation for Research and Development (ARAID), Instituto de Investigación en Ingeniería de Aragón (i3A), Universidad de Zaragoza, Zaragoza, Spain. pmartins@unizar.es.
Förderung
- Fundação para a Ciência e a Tecnologia
Zitieren
APA
Teixeira, A. M., André, A. D., Parente, M., da Luz Barroso, M., Cunha, C., Costa, H., & Martins, P. (2026). Mechanical behavior of human breast tissues: ex vivo and in silico characterization. Biomechanics and Modeling in Mechanobiology, 25(2). https://doi.org/10.1007/s10237-026-02045-x
Vancouver
Teixeira AM, André AD, Parente M, da Luz Barroso M, Cunha C, Costa H, et al. Mechanical behavior of human breast tissues: ex vivo and in silico characterization. Biomechanics and Modeling in Mechanobiology. 2026;25(2). doi:10.1007/s10237-026-02045-x
BibTeX
@article{Teixeira2026,
author = {Teixeira, Ana Margarida and André, António Diogo and Parente, Marco and da Luz Barroso, Maria and Cunha, Cristina and Costa, Horácio and Martins, Pedro},
title = {Mechanical behavior of human breast tissues: ex vivo and in silico characterization},
journal = {Biomechanics and Modeling in Mechanobiology},
year = {2026},
volume = {25},
number = {2},
doi = {10.1007/s10237-026-02045-x}
}
EUVIMED