Biomechanical stress profiling in coronary arteries via two-phase blood FSI
Biomechanics and Modeling in Mechanobiology · 2025-12 · 24 (6) · 2171-2193
DOI: 10.1007/s10237-025-02012-y ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomechanics and Modeling in Mechanobiology, online erschienen am 22.09.2025. Verfasst von Farajollah Zare Jouneghani und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Electrical and Mechanical Engineering, University of Adelaide, Adelaide, South Australia, 5005, Australia. farajollah.zarejouneghani@adelai…. Hauptthemen laut MEDLINE: Coronary Vessels, Stress, Mechanical. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 83 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The University of Adelaide.
Abstract (Originalsprache)
This study focuses on the biomechanical stress determination of the left circumflex (LCx) coronary artery reconstructed based on in vivo angiography images via the development of a comprehensive biomechanical model incorporating a two-phase two-way coupled three-dimensional fluid–structure interaction (FSI). The blood flow is modelled as a two-phase pulsatile fluid, with 45% red blood cells and 55% plasma, and the artery wall is modelled as a soft viscohyperelastic material that is able to dynamically react to the blood-induced pressure. The flow characteristics, such as pressure, velocity, phase distribution, near-wall haemodynamic parameters, and flow-induced indices, are determined. The von Mises stress (VMS) and the deformation field of the arterial wall are also obtained. Comparing results based on the two-phase FSI model and those of a single-phase FSI show that taking into account the red blood cells alters the stresses, providing a better understanding of potential cardiovascular events. In all the cases investigated in this study, the wall shear stress (WSS) levels predicted by the two-phase FSI model are consistently lower than those obtained from the single-phase simulations. For example, at the location of maximum WSS during peak systole, the single-phase simulation employing the Quemada viscosity model predicts 143.43 Pa, whereas the single-phase simulation based on the power-law model predicts 39.85 Pa. In contrast, the two-phase model yields a substantially lower value of 24.79 Pa.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Electrical and Mechanical Engineering, University of Adelaide, Adelaide, South Australia, 5005, Australia. farajollah.zarejouneghani@adelaide.edu.au.
- School of Electrical and Mechanical Engineering, University of Adelaide, Adelaide, South Australia, 5005, Australia.
- School of Engineering, Westlake University, Zhejiang Province, Hangzhou, China.
- School of Electrical and Mechanical Engineering, University of Adelaide, Adelaide, South Australia, 5005, Australia. mergen.ghayesh@adelaide.edu.au.
Förderung
- The University of Adelaide
Zitieren
APA
Zare Jouneghani, F., Ghomashchi, R., Amabili, M., & Ghayesh, M. H. (2025). Biomechanical stress profiling in coronary arteries via two-phase blood FSI. Biomechanics and Modeling in Mechanobiology, 24(6), 2171-2193. https://doi.org/10.1007/s10237-025-02012-y
Vancouver
Zare Jouneghani F, Ghomashchi R, Amabili M, Ghayesh MH. Biomechanical stress profiling in coronary arteries via two-phase blood FSI. Biomechanics and Modeling in Mechanobiology. 2025;24(6):2171-2193. doi:10.1007/s10237-025-02012-y
BibTeX
@article{ZareJouneghani2025,
author = {Zare Jouneghani, Farajollah and Ghomashchi, Reza and Amabili, Marco and Ghayesh, Mergen H},
title = {Biomechanical stress profiling in coronary arteries via two-phase blood FSI},
journal = {Biomechanics and Modeling in Mechanobiology},
year = {2025},
volume = {24},
number = {6},
pages = {2171--2193},
doi = {10.1007/s10237-025-02012-y}
}
EUVIMED