Estimating nonlinear anisotropic properties of healthy and aneurysm ascending aortas using magnetic resonance imaging
Biomechanics and Modeling in Mechanobiology · 2025
DOI: 10.1007/s10237-024-01907-6 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomechanics and Modeling in Mechanobiology, 2025. Verfasst von Álvaro T Latorre Molins und 6 weiteren Autor:innen. Beteiligte Einrichtung: Aragón Institute for Engineering Research (I3A), University of Zaragoza, Zaragoza, Spain. alatorr@unizar.es. Hauptthemen laut MEDLINE: Magnetic Resonance Imaging, Nonlinear Dynamics, Aorta, Aortic Aneurysm. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerio de Ciencia e Innovación, Gobierno de Aragón, Sociedad Española de Cardiología.
Abstract (Originalsprache)
An ascending aortic aneurysm is an often asymptomatic localized dilatation of the aorta. Aortic rupture is a life-threatening event that occurs when the stress on the aortic wall exceeds its mechanical strength. Therefore, patient-specific finite element models could play an important role in estimating the risk of rupture. This requires not only the geometry of the aorta but also the nonlinear anisotropic properties of the tissue. In this study, we presented a methodology to estimate the mechanical properties of the aorta from magnetic resonance imaging (MRI). As a theoretical framework, we used finite element models to which we added noise to simulate clinical data from real patient geometry and different properties of healthy and aneurysmal aortic tissues collected from the literature. The proposed methodology considered the nonlinear properties, the zero pressure geometry, the heart motion, and the external tissue support. In addition, we analyzed the aorta as a homogeneous material and as a heterogeneous model with different properties for the ascending and descending parts. The methodology was also applied to pre-surgical, in vivo MRI data of a patient who underwent surgery during which an aortic wall sample was obtained. The results were compared with those obtained from ex vivo biaxial test of the patient’s tissue sample. The methodology showed promising results after successfully recovering the nonlinear anisotropic material properties of all analyzed cases. This study demonstrates that the variable used during the optimization process can affect the result. In particular, variables such as principal strains were found to obtain more realistic materials than the displacement field.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Aragón Institute for Engineering Research (I3A), University of Zaragoza, Zaragoza, Spain. alatorr@unizar.es.
- Vall d'Hebron Institut de Recerca, Barcelona, Spain.
- Biomedical Research Networking Center on Cardiovascular Diseases (CIBER-CV), Instituto de Salud Carlos III, Madrid, Spain.
- Department of Cardiology, Hospital Universitari Vall d'Hebron, Barcelona, Spain.
- Departament de Medicina, Universitat Autónoma de Barcelona. Bellaterra, Barcelona, Spain.
- Aragón Institute for Engineering Research (I3A), University of Zaragoza, Zaragoza, Spain.
Förderung
- Ministerio de Ciencia e Innovación
- Gobierno de Aragón
- Sociedad Española de Cardiología
- Instituto de Salud Carlos III
- 'la Caixa' Foundation
- Universidad de Zaragoza
Zitieren
APA
Latorre Molins, Á. T., Guala, A., Dux-Santoy, L., Teixidó-Turà, G., Rodríguez-Palomares, J. F., Martínez Barca, M. Á., & Peña Baquedano, E. (2025). Estimating nonlinear anisotropic properties of healthy and aneurysm ascending aortas using magnetic resonance imaging. Biomechanics and Modeling in Mechanobiology. https://doi.org/10.1007/s10237-024-01907-6
Vancouver
Latorre Molins ÁT, Guala A, Dux-Santoy L, Teixidó-Turà G, Rodríguez-Palomares JF, Martínez Barca MÁ, et al. Estimating nonlinear anisotropic properties of healthy and aneurysm ascending aortas using magnetic resonance imaging. Biomechanics and Modeling in Mechanobiology. 2025. doi:10.1007/s10237-024-01907-6
BibTeX
@article{LatorreMolins2025,
author = {Latorre Molins, Álvaro T and Guala, Andrea and Dux-Santoy, Lydia and Teixidó-Turà, Gisela and Rodríguez-Palomares, José Fernando and Martínez Barca, Miguel Ángel and Peña Baquedano, Estefanía},
title = {Estimating nonlinear anisotropic properties of healthy and aneurysm ascending aortas using magnetic resonance imaging},
journal = {Biomechanics and Modeling in Mechanobiology},
year = {2025},
doi = {10.1007/s10237-024-01907-6}
}
EUVIMED