Incorporating pathological gait into patient-specific finite element models of the haemophilic ankle
Biomechanics and Modeling in Mechanobiology · 2024
DOI: 10.1007/s10237-024-01857-z ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomechanics and Modeling in Mechanobiology, 2024. Verfasst von Harriet G Talbott und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Medical and Biological Engineering, School of Mechanical Engineering, University of Leeds, Leeds, LS2 9JT, UK. Hauptthemen laut MEDLINE: Finite Element Analysis, Hemophilia A, Gait, Ankle Joint. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council, National Institute for Health and Care Research.
Abstract (Originalsprache)
Haemarthrosis is an inherent clinical feature of haemophilia, a disease characterised by an absence or reduction in clotting proteins. Patients with severe haemophilia experience joint bleeding leading to blood-induced ankle arthropathy (haemarthropathy). Altered biomechanics of the ankle have been reported in people with haemophilia; however, the consequence of this on joint health is little understood. The aim of this study was to assess the changes in joint contact due to haemophilia disease-specific gait features using patient-specific modelling, to better understand the link between biomechanics and joint outcomes. Four, image-based, finite element models of haemophilic ankles were simulated through consecutive events in the stance phase of gait, using both patient-specific and healthy control group (n = 36) biomechanical inputs. One healthy control FE model was simulated through the healthy control stance phase of the gait cycle for a point of comparison. The method developed allowed cartilage contact mechanics to be assessed throughout the loading phase of the gait cycle. This showed areas of increased contact pressure in the medial and lateral regions of the talar dome, which may be linked to collapse in these regions. This method may allow the relationship between structure and function in the tibiotalar joint to be better understood.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Medical and Biological Engineering, School of Mechanical Engineering, University of Leeds, Leeds, LS2 9JT, UK.
- School of Engineering, University of Hull, Hull, HU6 7RX, UK.
- NIHR Leeds BRC, University of Leeds, Leeds, UK.
- Leeds Teaching Hospitals NHS Trust, Leeds, UK.
- Department of Mechanical Engineering, Insigneo Institute, University of Sheffield, Sheffield, UK.
- Institute of Medical and Biological Engineering, School of Mechanical Engineering, University of Leeds, Leeds, LS2 9JT, UK. m.mengoni@leeds.ac.uk.
Förderung
- Engineering and Physical Sciences Research Council
- National Institute for Health and Care Research
Zitieren
APA
Talbott, H. G., Wilkins, R. A., Brockett, C. L., & Mengoni, M. (2024). Incorporating pathological gait into patient-specific finite element models of the haemophilic ankle. Biomechanics and Modeling in Mechanobiology. https://doi.org/10.1007/s10237-024-01857-z
Vancouver
Talbott HG, Wilkins RA, Brockett CL, Mengoni M. Incorporating pathological gait into patient-specific finite element models of the haemophilic ankle. Biomechanics and Modeling in Mechanobiology. 2024. doi:10.1007/s10237-024-01857-z
BibTeX
@article{Talbott2024,
author = {Talbott, Harriet G and Wilkins, Richard A and Brockett, Claire L and Mengoni, Marlène},
title = {Incorporating pathological gait into patient-specific finite element models of the haemophilic ankle},
journal = {Biomechanics and Modeling in Mechanobiology},
year = {2024},
doi = {10.1007/s10237-024-01857-z}
}
EUVIMED