EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of meniscus modelling assumptions in a static tibiofemoral finite element model: importance of geometry over material

Jiacheng Yao, John Crockett, Mathias D'Souza, Gavin A Day, Ruth K Wilcox, Alison C Jones, Marlène Mengoni

Biomechanics and Modeling in Mechanobiology · 2024

DOI: 10.1007/s10237-024-01822-w ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomechanics and Modeling in Mechanobiology, 2024. Verfasst von Jiacheng Yao und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Medical and Biological Engineering, School of Mechanical Engineering, University of Leeds, Leeds, UK. Hauptthemen laut MEDLINE: Finite Element Analysis, Femur, Tibia, Menisci, Tibial. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council, Leeds Biomedical Research Centre.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Finite element studies of the tibiofemoral joint have increased use in research, with attention often placed on the material models. Few studies assess the effect of meniscus modelling assumptions in image-based models on contact mechanics outcomes. This work aimed to assess the effect of modelling assumptions of the meniscus on knee contact mechanics and meniscus kinematics. A sensitivity analysis was performed using three specimen-specific tibiofemoral models and one generic knee model. The assumptions in representing the meniscus attachment on the tibia (shape of the roots and position of the attachment), the material properties of the meniscus, the shape of the meniscus and the alignment of the joint were evaluated, creating 40 model instances. The values of material parameters for the meniscus and the position of the root attachment had a small influence on the total contact area but not on the meniscus displacement or the force balance between condyles. Using 3D shapes to represent the roots instead of springs had a large influence in meniscus displacement but not in knee contact area. Changes in meniscus shape and in knee alignment had a significantly larger influence on all outcomes of interest, with differences two to six times larger than those due to material properties. The sensitivity study demonstrated the importance of meniscus shape and knee alignment on meniscus kinematics and knee contact mechanics, both being more important than the material properties or the position of the roots. It also showed that differences between knees were large, suggesting that clinical interpretations of modelling studies using single geometries should be avoided.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Finite Element AnalysisFemurTibiaMenisci, TibialModels, BiologicalHumansBiomechanical PhenomenaMeniscusKnee Joint

Stichwörter der Autor:innen

Contact mechanicsMeniscusSensitivityTibiofemoral joint

Autor:innen und Institutionen

  • Institute of Medical and Biological Engineering, School of Mechanical Engineering, University of Leeds, Leeds, UK.
  • Institute of Medical and Biological Engineering, School of Mechanical Engineering, University of Leeds, Leeds, UK. m.mengoni@leeds.ac.uk.

Förderung

  • Engineering and Physical Sciences Research Council
  • Leeds Biomedical Research Centre

Zitieren

APA

Yao, J., Crockett, J., D'Souza, M., A Day, G., K Wilcox, R., C Jones, A., & Mengoni, M. (2024). Effect of meniscus modelling assumptions in a static tibiofemoral finite element model: importance of geometry over material. Biomechanics and Modeling in Mechanobiology. https://doi.org/10.1007/s10237-024-01822-w

Vancouver

Yao J, Crockett J, D'Souza M, A Day G, K Wilcox R, C Jones A, et al. Effect of meniscus modelling assumptions in a static tibiofemoral finite element model: importance of geometry over material. Biomechanics and Modeling in Mechanobiology. 2024. doi:10.1007/s10237-024-01822-w

BibTeX
@article{Yao2024,
  author = {Yao, Jiacheng and Crockett, John and D'Souza, Mathias and A Day, Gavin and K Wilcox, Ruth and C Jones, Alison and Mengoni, Marlène},
  title = {Effect of meniscus modelling assumptions in a static tibiofemoral finite element model: importance of geometry over material},
  journal = {Biomechanics and Modeling in Mechanobiology},
  year = {2024},
  doi = {10.1007/s10237-024-01822-w}
}
Kostenlos starten →