EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

On the comparison between pre- and post-surgery nasal anatomies via computational fluid dynamics

Eric Segalerba, Gabriele Dini Ciacci, Maurizio Quadrio, Jan O Pralits

Biomechanics and Modeling in Mechanobiology · 2024

DOI: 10.1007/s10237-023-01776-5 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomechanics and Modeling in Mechanobiology, 2024. Verfasst von Eric Segalerba und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil, Chemical and Environmental Engineering, University of Genova, Via Montallegro, 1, 16145, Genoa, Italy. Hauptthemen laut MEDLINE: Hydrodynamics, Nose. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Politecnico di Milano.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nasal breathing difficulties (NBD) are widespread and difficult to diagnose; the failure rate of their surgical corrections is high. Computational fluid dynamics (CFD) enables diagnosis of NBD and surgery planning, by comparing a pre-operative (pre-op) situation with the outcome of virtual surgery (post-op). An equivalent comparison is involved when considering distinct anatomies in the search for the functionally normal nose. Currently, this comparison is carried out in more than one way, under the implicit assumption that results are unchanged, which reflects our limited understanding of the driver of the respiratory function. The study describes how to set up a meaningful comparison. A pre-op anatomy, derived via segmentation from a CT scan, is compared with a post-op anatomy obtained via virtual surgery. State-of-the-art numerical simulations for a steady inspiration carry out the comparison under three types of global constraints, derived from the field of turbulent flow control: a constant pressure drop (CPG) between external ambient and throat, a constant flow rate (CFR) through the airways and a constant power input (CPI) from the lungs can be enforced. A significant difference in the quantities of interest is observed depending on the type of comparison. Global quantities (flow rate, pressure drop and nasal resistance) as well as local ones are affected. The type of flow forcing affects the outcome of the comparison between pre-op and post-op anatomies. Among the three available options, we argue that CPG is the least adequate. Arguments favouring either CFR or CPI are presented.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

HydrodynamicsNoseRespirationTomography, X-Ray ComputedComputer Simulation

Stichwörter der Autor:innen

CFDConstant power inputLESNasal flowNasal resistance

Autor:innen und Institutionen

  • Department of Civil, Chemical and Environmental Engineering, University of Genova, Via Montallegro, 1, 16145, Genoa, Italy.
  • Department of Aerospace Sciences and Technologies, Politecnico di Milano, Campus Bovisa, 20156, Milano, Italy.
  • Department of Aerospace Sciences and Technologies, Politecnico di Milano, Campus Bovisa, 20156, Milano, Italy. maurizio.quadrio@polimi.it.
  • Department of Civil, Chemical and Environmental Engineering, University of Genova, Via Montallegro, 1, 16145, Genoa, Italy. jan.pralits@unige.it.

Förderung

  • Politecnico di Milano

Zitieren

APA

Segalerba, E., Dini Ciacci, G., Quadrio, M., & Pralits, J. O. (2024). On the comparison between pre- and post-surgery nasal anatomies via computational fluid dynamics. Biomechanics and Modeling in Mechanobiology. https://doi.org/10.1007/s10237-023-01776-5

Vancouver

Segalerba E, Dini Ciacci G, Quadrio M, Pralits JO. On the comparison between pre- and post-surgery nasal anatomies via computational fluid dynamics. Biomechanics and Modeling in Mechanobiology. 2024. doi:10.1007/s10237-023-01776-5

BibTeX
@article{Segalerba2024,
  author = {Segalerba, Eric and Dini Ciacci, Gabriele and Quadrio, Maurizio and Pralits, Jan O},
  title = {On the comparison between pre- and post-surgery nasal anatomies via computational fluid dynamics},
  journal = {Biomechanics and Modeling in Mechanobiology},
  year = {2024},
  doi = {10.1007/s10237-023-01776-5}
}
Kostenlos starten →