Prediction of skull fractures in blunt force head traumas using finite element head models
Biomechanics and Modeling in Mechanobiology · 2024-02 · 23 (1) · 207-225
DOI: 10.1007/s10237-023-01768-5 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomechanics and Modeling in Mechanobiology, online erschienen am 01.09.2023. Verfasst von Natalia Lindgren und 5 weiteren Autor:innen. Beteiligte Einrichtung: Division of Neuronic Engineering, KTH Royal Institute of Technology, Stockholm, Sweden. nalindgr@kth.se. Hauptthemen laut MEDLINE: Skull Fractures, Craniocerebral Trauma. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Vetenskapsrådet,Sweden, VINNOVA, Royal Institute of Technology.
Abstract (Originalsprache)
Traumatic head injuries remain a leading cause of death and disability worldwide. Although skull fractures are one of the most common head injuries, the fundamental mechanics of cranial bone and its impact tolerance are still uncertain. In the present study, a strain-rate-dependent material model for cranial bone has been proposed and implemented in subject-specific Finite Element (FE) head models in order to predict skull fractures in five real-world fall accidents. The subject-specific head models were developed following an established image-registration-based personalization pipeline. Head impact boundary conditions were derived from accident reconstructions using personalized human body models. The simulated fracture lines were compared to those visible in post-mortem CT scans of each subject. In result, the FE models did predict the actual occurrence and extent of skull fractures in all cases. In at least four out of five cases, predicted fracture patterns were comparable to ones from CT scans and autopsy reports. The tensile material model, which was tuned to represent rate-dependent tensile data of cortical skull bone from literature, was able to capture observed linear fractures in blunt indentation loading of a skullcap specimen. The FE model showed to be sensitive to modeling parameters, in particular to the constitutive parameters of the cortical tables. Nevertheless, this study provides a currently lacking strain-rate dependent material model of cranial bone that has the capacity to accurately predict linear fracture patterns. For the first time, a procedure to reconstruct occurrences of skull fractures using computational engineering techniques, capturing the all-in-all fracture initiation, propagation and final pattern, is presented.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Division of Neuronic Engineering, KTH Royal Institute of Technology, Stockholm, Sweden. nalindgr@kth.se.
- Department of Forensic Medicine, University of Copenhagen, Copenhagen, Denmark.
- Division of Neuronic Engineering, KTH Royal Institute of Technology, Stockholm, Sweden.
Förderung
- Vetenskapsrådet,Sweden
- VINNOVA
- Royal Institute of Technology
Zitieren
APA
Lindgren, N., Henningsen, M. J., Jacobsen, C., Villa, C., Kleiven, S., & Li, X. (2024). Prediction of skull fractures in blunt force head traumas using finite element head models. Biomechanics and Modeling in Mechanobiology, 23(1), 207-225. https://doi.org/10.1007/s10237-023-01768-5
Vancouver
Lindgren N, Henningsen MJ, Jacobsen C, Villa C, Kleiven S, Li X. Prediction of skull fractures in blunt force head traumas using finite element head models. Biomechanics and Modeling in Mechanobiology. 2024;23(1):207-225. doi:10.1007/s10237-023-01768-5
BibTeX
@article{Lindgren2024,
author = {Lindgren, Natalia and Henningsen, Mikkel J and Jacobsen, Christina and Villa, Chiara and Kleiven, Svein and Li, Xiaogai},
title = {Prediction of skull fractures in blunt force head traumas using finite element head models},
journal = {Biomechanics and Modeling in Mechanobiology},
year = {2024},
volume = {23},
number = {1},
pages = {207--225},
doi = {10.1007/s10237-023-01768-5}
}
EUVIMED