EUVIMEDEUVIMED entdecken
Crossref

Mechanical properties of triply periodic minimal surface (TPMS) scaffolds: considering the influence of spatial angle and surface curvature

Zhitong Li, Zhaobo Chen, Xiongbiao Chen, Runchao Zhao

Biomechanics and Modeling in Mechanobiology · 2023-04 · 22 (2) · 541-560

DOI: 10.1007/s10237-022-01661-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomechanics and Modeling in Mechanobiology, online erschienen am 22.12.2022. Verfasst von Zhitong Li und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechatronics Engineering, Harbin Institute of Technology, Harbin, 150000, Heilongjiang, China. Hauptthemen laut MEDLINE: Tissue Engineering, Tissue Scaffolds. Die Arbeit wurde bisher 46-mal zitiert (Crossref) und nennt 47 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Triply periodic minimal surface (TPMS) has a promising application in the design of bone scaffolds due to its relevance in bone structure. Notably, the mechanical properties of TPMS scaffolds can be affected by many factors, including the spatial angle and surface curvature, which, however, remain to be discovered. This paper illustrates our study on the mechanical properties of tissue scaffolds consisting of TPMS structures (Primitive and I-WP) by considering the influence of spatial angle and surface curvature. Also, the development of a novel model representative of the mechanical properties of scaffolds based on the entropy weight fuzzy comprehensive evaluation method is also presented. For experimental investigation and validation, we employed the selective laser melting technology to manufacture scaffolds with varying structures from AlSi10Mg powder and then performed mechanical testing on the scaffolds. Our results show that for a given porosity, the Gaussian curvature of the stretched TPMS structures is more concentrated and have a higher elastic modulus and fatigue life. At the spatial angle θ = 27°, the shear modulus of the primitive unit reaches its largest value; the shear modulus of the I-WP unit is positively correlated with the spatial angle. Additionally, it is found that the comprehensive mechanical properties of TPMS structures can be significantly improved after changing the surface curvature. Taken together, the identified influence of spatial angle and surface curvature and the developed models of scaffold mechanical properties would be of significant advance and guidance for the design and development of bone scaffolds.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue EngineeringTissue ScaffoldsSurface PropertiesBone and BonesPorosity

Stichwörter der Autor:innen

Additive manufacturingGaussian curvatureMechanical propertiesPerformance evaluation modelScaffold

Autor:innen und Institutionen

  • School of Mechatronics Engineering, Harbin Institute of Technology, Harbin, 150000, Heilongjiang, China.
  • School of Mechatronics Engineering, Harbin Institute of Technology, Harbin, 150000, Heilongjiang, China. chenzb@hit.edu.cn.
  • Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, S7N5A9, Canada.

Zitieren

APA

Li, Z., Chen, Z., Chen, X., & Zhao, R. (2023). Mechanical properties of triply periodic minimal surface (TPMS) scaffolds: considering the influence of spatial angle and surface curvature. Biomechanics and Modeling in Mechanobiology, 22(2), 541-560. https://doi.org/10.1007/s10237-022-01661-7

Vancouver

Li Z, Chen Z, Chen X, Zhao R. Mechanical properties of triply periodic minimal surface (TPMS) scaffolds: considering the influence of spatial angle and surface curvature. Biomechanics and Modeling in Mechanobiology. 2023;22(2):541-560. doi:10.1007/s10237-022-01661-7

BibTeX
@article{Li2023,
  author = {Li, Zhitong and Chen, Zhaobo and Chen, Xiongbiao and Zhao, Runchao},
  title = {Mechanical properties of triply periodic minimal surface (TPMS) scaffolds: considering the influence of spatial angle and surface curvature},
  journal = {Biomechanics and Modeling in Mechanobiology},
  year = {2023},
  volume = {22},
  number = {2},
  pages = {541--560},
  doi = {10.1007/s10237-022-01661-7}
}
Kostenlos starten →