EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancement of second life cycle potential of polypropylene exposed to combined thermo-oxidative aging during an automotive use phase and thermo-mechanical aging in mechanical recycling processing

Simon Hoebel, Florian Bittner, Hannah Behnsen, Jacek Lecinski, Pia Ansahl, Hans-Josef Endres

Journal of Material Cycles and Waste Management · 2026-07 · 28 (4) · 3496-3512

DOI: 10.1007/s10163-026-02632-1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Material Cycles and Waste Management, online erschienen am 16.06.2026. Verfasst von Simon Hoebel und 5 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Gottfried Wilhelm Leibniz Universität Hannover.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Plastic components undergo changes during the use and recycling phases, altering their material properties. Two relevant aging processes are identified for polypropylene (PP), a commonly used polymer in the automotive industry. During the use phase, thermo-oxidative aging occurs, while the production and recycling phase is dominated by thermo-mechanical aging. Thermo-oxidative aging typically causes changes starting at the surface. Mechanical recycling can partially undo these aging effects. During the mechanical recycling process involving grinding, extrusion, and finishing processes like injection molding, thermo-mechanical aging results in further property changes. This study examines potential options for enhancing the quality of PP after mechanical recycling. To evaluate the aging behavior, two life cycles were simulated, consisting of a combination of use phase and mechanical recycling. The use phase was simulated by accelerated thermal aging at 135 °C for three weeks. The study explores two approaches to improve the quality of recycled PP for a second life cycle. Firstly, the altered polymer chains near the surface were removed through friction grinding. Secondly, post-stabilization scenarios were performed during the recycling process. While the post-stabilization showed a clear effect on the aging resistance of the recyclates, the effects of the frictional grinding were not evident.

Förderung

  • Gottfried Wilhelm Leibniz Universität Hannover

Zitieren

APA

Hoebel, S., Bittner, F., Behnsen, H., Lecinski, J., Ansahl, P., & Endres, H. (2026). Enhancement of second life cycle potential of polypropylene exposed to combined thermo-oxidative aging during an automotive use phase and thermo-mechanical aging in mechanical recycling processing. Journal of Material Cycles and Waste Management, 28(4), 3496-3512. https://doi.org/10.1007/s10163-026-02632-1

Vancouver

Hoebel S, Bittner F, Behnsen H, Lecinski J, Ansahl P, Endres H. Enhancement of second life cycle potential of polypropylene exposed to combined thermo-oxidative aging during an automotive use phase and thermo-mechanical aging in mechanical recycling processing. Journal of Material Cycles and Waste Management. 2026;28(4):3496-3512. doi:10.1007/s10163-026-02632-1

BibTeX
@article{Hoebel2026,
  author = {Hoebel, Simon and Bittner, Florian and Behnsen, Hannah and Lecinski, Jacek and Ansahl, Pia and Endres, Hans-Josef},
  title = {Enhancement of second life cycle potential of polypropylene exposed to combined thermo-oxidative aging during an automotive use phase and thermo-mechanical aging in mechanical recycling processing},
  journal = {Journal of Material Cycles and Waste Management},
  year = {2026},
  volume = {28},
  number = {4},
  pages = {3496--3512},
  doi = {10.1007/s10163-026-02632-1}
}
Kostenlos starten →