Effects of heating rate and temperature on product distribution of poly-lactic acid and poly-3-hydroxybutyrate-co-3-hydroxyhexanoate
Journal of Material Cycles and Waste Management · 2023-03 · 25 (2) · 650-661
DOI: 10.1007/s10163-022-01573-9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Material Cycles and Waste Management, online erschienen am 20.12.2022. Verfasst von Zhuze Shao und 4 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Environment Research and Technology Development Fund.
Abstract (Originalsprache)
In this study, poly-lactic acid (PLA) and poly-3-hydroxybutyrate- co -3-hydroxyhexanoate (PHBH) were pyrolyzed at various temperatures (300, 350, 400, 500, 600, and 700 °C) and heating rates (5, 10, 20, 30, and 40 °C min −1 ) using a pyrolysis–gas chromatograph/mass spectrometer (Py–GC/MS). The results revealed that the main pyrolysis products of PLA were acetaldehyde, lactide (including meso-lactide and d -, l -lactide), and oligomers. Crotonic acid and its oligomers accounted for most of the PHBH pyrolyzates. The pyrolysis temperature significantly correlated with the product distribution, but the heating rate had a small effect on the product distribution. Lactide and crotonic acid were two kinds of high-value chemicals, and their highest yields were obtained at 400 and 600 °C with 29.7 and 72.6 area %, respectively. Secondary reactions could not be neglected at 700 °C, and acetaldehyde and crotonic acid decreased to 65.0 and 69.6 area %, respectively. These results imply that pyrolyzate selectivity can be controlled by temperature management during pyrolysis.
Förderung
- Environment Research and Technology Development Fund
Zitieren
APA
Shao, Z., Kumagai, S., Kameda, T., Saito, Y., & Yoshioka, T. (2023). Effects of heating rate and temperature on product distribution of poly-lactic acid and poly-3-hydroxybutyrate-co-3-hydroxyhexanoate. Journal of Material Cycles and Waste Management, 25(2), 650-661. https://doi.org/10.1007/s10163-022-01573-9
Vancouver
Shao Z, Kumagai S, Kameda T, Saito Y, Yoshioka T. Effects of heating rate and temperature on product distribution of poly-lactic acid and poly-3-hydroxybutyrate-co-3-hydroxyhexanoate. Journal of Material Cycles and Waste Management. 2023;25(2):650-661. doi:10.1007/s10163-022-01573-9
BibTeX
@article{Shao2023,
author = {Shao, Zhuze and Kumagai, Shogo and Kameda, Tomohito and Saito, Yuko and Yoshioka, Toshiaki},
title = {Effects of heating rate and temperature on product distribution of poly-lactic acid and poly-3-hydroxybutyrate-co-3-hydroxyhexanoate},
journal = {Journal of Material Cycles and Waste Management},
year = {2023},
volume = {25},
number = {2},
pages = {650--661},
doi = {10.1007/s10163-022-01573-9}
}
EUVIMED