Process design, simulation, and techno-economic analysis of integrated production of furfural and glucose derived from palm oil empty fruit bunches
Clean Technologies and Environmental Policy · 2023-07 · 25 (5) · 1551-1567
DOI: 10.1007/s10098-022-02454-3 ↗Kurz gefasst
Fachartikel in der Zeitschrift Clean Technologies and Environmental Policy, online erschienen am 07.01.2023. Verfasst von Muhammad Zafran Raja Mohammed und 8 weiteren Autor:innen. Beteiligte Einrichtung: Discipline of Chemical Engineering, School of Engineering, Monash University, Bandar Sunway, Malaysia. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.
Abstract (Originalsprache)
This study aims to propose a new process design, simulation, and techno-economic analysis of an integrated process plant that produces glucose and furfural from palm oil empty fruit bunches (EFB). In this work, an Aspen Plus-based simulation has been established to develop a process flow diagram of co-production of glucose and furfural along with the mass and energy balances. The plant's economics are analyzed by calculating the fixed capital income (FCI), operating costs, and working capital. In contrast, profitability is determined using cumulative cash flow (CCF), net present value (NPV), and internal rate of return (IRR). The findings show that the production capacity of 10 kilotons per year (ktpy) of glucose and 4.96 ktpy of furfural with a purity of 98.21 and 99.54%-weight, respectively, was achieved in this study. The FCI is calculated as United States Dollar (USD) 20.80 million, while the working and operating expenses are calculated as USD 3.74 million and USD 16.93 million, respectively. This project achieves USD 7.65 million NPV with a positive IRR of 14.25% and a return on investment (ROI) of 22.06%. The present work successfully develops a profitable integrated process plant that is established with future upscaling parameters and key cost drivers. The findings provided in this work offer a platform and motivation for future research on integrated plants in the food, environment, and energy nexus with the co-location principle.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Discipline of Chemical Engineering, School of Engineering, Monash University, Bandar Sunway, Malaysia.
- Research Centre for Sustainable Technologies, Faculty of Engineering, Computing and Science, Swinburne University of Technology, Jalan Simpang Tiga, 93350 Kuching, Sarawak Malaysia.
- Institute of Industrial Science, The University of Tokyo, 4-6-1 Komaba, Meguro-Ku, Tokyo, 153-8505 Japan.
- Department of Chemical Engineering, Faculty of Science and Engineering, University of Hull, Kingston Upon Hull, HU6 7RX UK.
- Climateworks Centre, Level 27, 35 Collins St, Melbourne, VIC 3000 Australia.
- Monash University, BSD, Serpong, Banten, Indonesia.
Zitieren
APA
Mohammed, M. Z. R., Ng, Z. W., Putranto, A., Kong, Z. Y., Sunarso, J., Aziz, M., Zein, S. H., Giwangkara, J., & Butar, I. (2023). Process design, simulation, and techno-economic analysis of integrated production of furfural and glucose derived from palm oil empty fruit bunches. Clean Technologies and Environmental Policy, 25(5), 1551-1567. https://doi.org/10.1007/s10098-022-02454-3
Vancouver
Mohammed MZR, Ng ZW, Putranto A, Kong ZY, Sunarso J, Aziz M, et al. Process design, simulation, and techno-economic analysis of integrated production of furfural and glucose derived from palm oil empty fruit bunches. Clean Technologies and Environmental Policy. 2023;25(5):1551-1567. doi:10.1007/s10098-022-02454-3
BibTeX
@article{Mohammed2023,
author = {Mohammed, Muhammad Zafran Raja and Ng, Zi Wei and Putranto, Aditya and Kong, Zong Yang and Sunarso, Jaka and Aziz, Muhammad and Zein, Sharif H and Giwangkara, Jannata and Butar, Ivan},
title = {Process design, simulation, and techno-economic analysis of integrated production of furfural and glucose derived from palm oil empty fruit bunches},
journal = {Clean Technologies and Environmental Policy},
year = {2023},
volume = {25},
number = {5},
pages = {1551--1567},
doi = {10.1007/s10098-022-02454-3}
}
EUVIMED