Navigating the landscape of novel meshes: comprehensive review of physicomechanical categorization of mesh for hernia repair
Hernia · 19.06.2026 · 30 (1)
DOI: 10.1007/s10029-026-03750-3 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Hernia, online erschienen am 19.06.2026. Verfasst von Alynah J Adams und 9 weiteren Autor:innen. Beteiligte Einrichtung: Division of Plastic and Reconstructive Surgery, Beth Israel Deaconess Medical Center, Harvard Medical School, Boston, MA, 02215, USA. Hauptthemen laut MEDLINE: Surgical Mesh, Herniorrhaphy. Die Arbeit nennt 47 Literaturangaben.
Abstract (Originalsprache)
Introduction
In the vast landscape of commercially available and newly emerging meshes for abdominal wall repair, surgeons must understand the biomechanical advantages of current synthetic and biologic mesh materials.
Methods
A librarian conducted a literature search on PubMed, Web of Science, and CENTRAL, following PRISMA guidelines, to identify relevant articles published from January 2010 to January 2024. Two independent reviewers performed all screening steps. An exploratory quantitative synthesis was performed using generalized linear models with a Gamma distribution and log link.
Results
Our study identified 30 studies describing the physico-mechanical properties of 67 unique meshes. The majority of novel mesh materials were synthetic (85.07%, n = 57), compared to biologic (14.92%, n = 10). Pore sizes ranged from 0.10 mm² to 5.0 mm². They were subcategorized as small (0.01–0.28 mm^2), medium (0.28–0.79 mm^2), large (0.79–3.14 mm^2), and very large (> 3.14 mm^2), based on previous studies, which found these denominations to be more informative than the terms “microporous” and “macroporous.” Suture retention strength, tensile strength, and burst strength were compared. Synthetic medium- to large-pore mesh performed sufficiently to withstand intra-abdominal pressures in terms of burst strength (>50 N/cm), tensile strength (>50 N/cm), and suture retention (>20 N) compared to small-pore synthetic mesh. Among biologic meshes, cross-linked biologic meshes demonstrated strong tensile and suture-retention strengths; however, data on other biomechanical properties were lacking.
Conclusions
These results demonstrate the need to understand how the structural characteristics of each fully mesh design, such as fabrication technique and pore size, in conjunction with mechanical properties such as tensile strength, burst strength, and suture retention strength, influence clinical outcomes.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Division of Plastic and Reconstructive Surgery, Beth Israel Deaconess Medical Center, Harvard Medical School, Boston, MA, 02215, USA.
- Drexel University College of Medicine, Philadelphia, PA, USA.
- Harvard Medical School, Boston, MA, USA.
- Division of Plastic and Reconstructive Surgery, Massachusetts General Hospital, Harvard Medical School, Boston, MA, USA.
- Division of Plastic and Reconstructive Surgery, University of Minnesota, Minneapolis, MN, USA.
- Division of Plastic and Reconstructive Surgery, Beth Israel Deaconess Medical Center, Harvard Medical School, Boston, MA, 02215, USA. sjlin@bidmc.harvard.edu.
Zitieren
APA
Adams, A. J., Smith, J. E., Taritsa, I. C., Stigliano, M., Li, K., Rao, A., Lee, D., Foppiani, J. A., Lin, S. J., & Lee, B. T. (2026). Navigating the landscape of novel meshes: comprehensive review of physicomechanical categorization of mesh for hernia repair. Hernia, 30(1). https://doi.org/10.1007/s10029-026-03750-3
Vancouver
Adams AJ, Smith JE, Taritsa IC, Stigliano M, Li K, Rao A, et al. Navigating the landscape of novel meshes: comprehensive review of physicomechanical categorization of mesh for hernia repair. Hernia. 2026;30(1). doi:10.1007/s10029-026-03750-3
BibTeX
@article{Adams2026,
author = {Adams, Alynah J and Smith, Jade E and Taritsa, Iulianna C and Stigliano, Mike and Li, Kelly and Rao, Arya and Lee, Daniela and Foppiani, Jose A and Lin, Samuel J and Lee, Bernard T},
title = {Navigating the landscape of novel meshes: comprehensive review of physicomechanical categorization of mesh for hernia repair},
journal = {Hernia},
year = {2026},
volume = {30},
number = {1},
doi = {10.1007/s10029-026-03750-3}
}
EUVIMED