EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Screen-printed electrodes modified with MOF(Cu-TPA) and activated charcoal for the simultaneous electrochemical detection of emerging pollutants

Gabriel A. F. V. da Silva, João M. R. Gonçalves, Paula Mantovani dos Santos, Leonardo L. Paim, Maria D. P. T. Sotomayor, Ademar Wong

Journal of Solid State Electrochemistry · 25.04.2026

DOI: 10.1007/s10008-026-06592-2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Solid State Electrochemistry, online erschienen am 25.04.2026. Verfasst von Gabriel A. F. V. da Silva und 5 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidade Estadual Paulista Júlio De Mesquita Filho.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present study reports the development and application of a disposable electrochemical platform based on screen-printed carbon electrodes modified with a copper-terephthalate metal–organic framework (MOF(Cu-TPA)) and activated charcoal (CA) for the simultaneous quantification of sulfadiazine (SDZ) and carbaryl (CAR) in environmental matrices. The physicochemical synergy between MOF(Cu-TPA) and CA enhanced the electrode interface by providing higher conductivity, increased surface area, and improved charge-transfer properties. The analysis of the redox behavior of both analytes (SDZ and CAR) using square-wave voltammetry (SWV) and phosphate buffer as supporting electrolyte (0.1 mol L⁻ 1 , pH 7.0) revealed two well-resolved anodic responses at 0.65 and 1.1 V. Under optimized SWV conditions, the sensor displayed linear analytical ranges of 9.0 × 10⁻⁷ to 1.2 × 10⁻ 5 mol L⁻ 1 for SDZ and 9.5 × 10⁻⁷ to 4.1 × 10⁻ 5 mol L⁻ 1 for CAR, with limits of detection (LOD) of 7.1 × 10⁻⁸ mol L⁻ 1 (SDZ) and 1.9 × 10⁻ 7 mol L⁻ 1 (CAR). The modified electrode exhibited excellent repeatability, reproducibility, and selectivity in the presence of common interferents, and showed no interferences, maintaining the stable analytical signal. When applied to river water samples, the sensing device yielded recovery rates between 95 and 109%, values found to be comparable with those of a reference HPLC method. The findings point to the viability and application potential of MOF(Cu-TPA)/CA-modified SPEs as low-cost and robust sensors for on-site monitoring of emerging pollutants. Graphical Abstract

Förderung

  • Universidade Estadual Paulista Júlio De Mesquita Filho

Zitieren

APA

Silva, G. A. F. V. D., Gonçalves, J. M. R., Santos, P. M. D., Paim, L. L., Sotomayor, M. D. P. T., & Wong, A. (2026). Screen-printed electrodes modified with MOF(Cu-TPA) and activated charcoal for the simultaneous electrochemical detection of emerging pollutants. Journal of Solid State Electrochemistry. https://doi.org/10.1007/s10008-026-06592-2

Vancouver

Silva GAFVD, Gonçalves JMR, Santos PMD, Paim LL, Sotomayor MDPT, Wong A. Screen-printed electrodes modified with MOF(Cu-TPA) and activated charcoal for the simultaneous electrochemical detection of emerging pollutants. Journal of Solid State Electrochemistry. 2026. doi:10.1007/s10008-026-06592-2

BibTeX
@article{Silva2026,
  author = {Silva, Gabriel A. F. V. da and Gonçalves, João M. R. and Santos, Paula Mantovani dos and Paim, Leonardo L. and Sotomayor, Maria D. P. T. and Wong, Ademar},
  title = {Screen-printed electrodes modified with MOF(Cu-TPA) and activated charcoal for the simultaneous electrochemical detection of emerging pollutants},
  journal = {Journal of Solid State Electrochemistry},
  year = {2026},
  doi = {10.1007/s10008-026-06592-2}
}
Kostenlos starten →