EUVIMEDEUVIMED entdecken
Crossref

Temperature-dependent failure of atomically thin MoTe2

A S M Redwan Haider, Ahmad Fatehi Ali Mohammed Hezam, Md Akibul Islam, Yeasir Arafat, Mohammad Tanvirul Ferdaous, Sayedus Salehin, Md Rezwanul Karim

Journal of Molecular Modeling · 2024-03 · 30 (3)

DOI: 10.1007/s00894-024-05883-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Molecular Modeling, online erschienen am 28.02.2024. Verfasst von A S M Redwan Haider und 6 weiteren Autor:innen. Beteiligte Einrichtung: Depatment of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 76 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

CONTEXT: In this study, we investigated the mechanical responses of molybdenum ditelluride (MoTe2) using molecular dynamics (MD) simulations. Our key focus was on the tensile behavior of MoTe2 with trigonal prismatic phase (2H-MoTe2) which was investigated under uniaxial tensile stress for both armchair and zigzag directions. Crack formation and propagation were examined to understand the fracture behavior of such material for varying temperatures. Additionally, the study also assesses the impact of temperature on Young's modulus and fracture stress-strain of a monolayer of 2H-MoTe2. METHOD: The investigation was done using molecular dynamics (MD) simulations using Stillinger-Weber (SW) potentials. The tensile behavior was simulated for temperature for 10 K and then from 100 to 600 K with a 100-K interval. The crack propagation and formation of 10 K and 300 K 2H-MoTe2 for both directions at different strain rates was analyzed using Ovito visualizer. All the simulations were conducted using a strain rate of 10-4 ps-1. The results show that the fracture strength of 2H-MoTe2 in the armchair and zigzag direction at 10 K is 16.33 GPa (11.43 N/m) and 13.71429 GPa (9.46 N/m) under a 24% and 18% fracture strain, respectively. The fracture strength of 2H-MoTe2 in the armchair and zigzag direction at 600 K is 10.81 GPa (7.56 N/m) and 10.13 GPa (7.09 N/m) under a 12.5% and 12.47% fracture strain, respectively.

Schlagwörter

Stichwörter der Autor:innen

2D materialsFracture mechanicsMolecular dynamics (MD)Molybdenum ditelluride (MoTe2)Stillinger–Weber (SW) potential

Autor:innen und Institutionen

  • Depatment of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh.
  • Department of Mechanical and Industrial Engineering, University of Toronto, Toronto, Canada. akibul.islam@mail.utoronto.ca.
  • Depatment of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh. rezwanul@iut-dhaka.edu.

Zitieren

APA

Haider, A. S. M. R., Hezam, A. F. A. M., Islam, M. A., Arafat, Y., Ferdaous, M. T., Salehin, S., & Karim, M. R. (2024). Temperature-dependent failure of atomically thin MoTe2. Journal of Molecular Modeling, 30(3). https://doi.org/10.1007/s00894-024-05883-7

Vancouver

Haider ASMR, Hezam AFAM, Islam MA, Arafat Y, Ferdaous MT, Salehin S, et al. Temperature-dependent failure of atomically thin MoTe2. Journal of Molecular Modeling. 2024;30(3). doi:10.1007/s00894-024-05883-7

BibTeX
@article{Haider2024,
  author = {Haider, A S M Redwan and Hezam, Ahmad Fatehi Ali Mohammed and Islam, Md Akibul and Arafat, Yeasir and Ferdaous, Mohammad Tanvirul and Salehin, Sayedus and Karim, Md Rezwanul},
  title = {Temperature-dependent failure of atomically thin MoTe2},
  journal = {Journal of Molecular Modeling},
  year = {2024},
  volume = {30},
  number = {3},
  doi = {10.1007/s00894-024-05883-7}
}
Kostenlos starten →