EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Decellularized bone matrix-enriched 3D-printed GelMA scaffold as a cell-homing platform: analysis using an artificial pulp chamber model

Isabela Sanches Pompeo da Silva, Vitor de Toledo Stuani, Ester Alves Ferreira Bordini, Fernanda Balestrero Cassiano, Erika Soares Bronze-Uhle, Priscila Toninatto Alves de Toledo, Lídia de Oliveira Fernandes, Josimeri Hebling, Carlos Alberto de Souza Costa, Diana Gabriela Soares

Clinical Oral Investigations · 2026

DOI: 10.1007/s00784-026-06761-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Clinical Oral Investigations, 2026. Verfasst von Isabela Sanches Pompeo da Silva und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Operative Dentistry, Endodontics, and Dental Materials, University of São Paulo - USP, Bauru School of Dentistry, Alameda Doutor Octávi…. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Tissue Scaffolds, Gelatin, Hydrogels. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidade De São Paulo.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

The aim of the study was to develop and evaluate bio-printed hydrogels based on gelatin methacrylate (GelMA) combined with different proportions of decellularized bovine bone matrix microparticles (BMdc).

Methods

GelMA hydrogels were synthesized and incorporated with decellularized bovine bone matrix (BMdc) at 1% by weight. 3D scaffolds were fabricated through extrusion, with varying infill densities (40%, 50%, and 60%), followed by photoactivation. Biological analyses included cell viability (Live/Dead assay), and proliferation (Alamar Blue assay), as well as osteogenic differentiation (ALP activity and Alizarin Red staining) over a 21-day period in HDPCs. Porosity and pore size were assessed with Rhodamine B staining, and cell migration to scaffolds was evaluated in a biomimetic artificial pulp chamber model. Data were analyzed with one-way ANOVA and Tukey’s test ( p < 0.05).

Results

Scaffolds with the highest porosity and the largest pore size in comparison with other groups was detected in the 40% infill group ( p < 0.05). Cells in the 50% and 60% infill groups exhibited higher viability, proliferation, and osteogenic differentiation, especially when BMdc particles were incorporated ( p < 0.05). The greatest cell migration at the artificial pulp chamber model was observed in the 60% infill group in association with BMdc particles ( p < 0.05).

Conclusions

In summary, 3D-printed GelMA-BMdc hydrogel with 60% infill is a cytocompatible biomaterial capable of inducing cell adhesion, odontogenic differentiation, and mineralization. This innovative biomaterial shows potential for future direct pulp capping applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalTissue ScaffoldsGelatinHydrogelsDental PulpMethacrylatesBone MatrixDecellularized Extracellular MatrixAnimalsCattleCell SurvivalPorosityCell ProliferationCell DifferentiationTissue EngineeringCell MovementOsteogenesisHumans

Stichwörter der Autor:innen

Decellularized extracellular matrixDentinGelatinHydrogelsTissue engineering

Substanzen

GelatinHydrogelsMethacrylatesDecellularized Extracellular Matrix

Autor:innen und Institutionen

  • Department of Operative Dentistry, Endodontics, and Dental Materials, University of São Paulo - USP, Bauru School of Dentistry, Alameda Doutor Octávio Pinheiro Brisolla, 9-75, Bauru, SP, Brazil.
  • Department of Prosthodontics and Dental Materials, University of São Paulo - USP, Ribeirão Preto School of Dentistry, Ribeirão Preto, Brazil.
  • Department of Pediatric Dentistry, School of Dentistry of Araraquara, São Paulo State University (Unesp), Street Humaitá, 1680 - Araraquara, São Paulo, 14801-385, Brazil.
  • Department of Physiology and Pathology, Araraquara School of Dentistry, São Paulo State University - UNESP, Araraquara, SP, Brazil.
  • Department of Operative Dentistry, Endodontics, and Dental Materials, University of São Paulo - USP, Bauru School of Dentistry, Alameda Doutor Octávio Pinheiro Brisolla, 9-75, Bauru, SP, Brazil. dianasoares@fob.usp.br.

Förderung

  • Universidade De São Paulo

Zitieren

APA

da Silva, I. S. P., de Toledo Stuani, V., Bordini, E. A. F., Cassiano, F. B., Bronze-Uhle, E. S., de Toledo, P. T. A., de Oliveira Fernandes, L., Hebling, J., de Souza Costa, C. A., & Soares, D. G. (2026). Decellularized bone matrix-enriched 3D-printed GelMA scaffold as a cell-homing platform: analysis using an artificial pulp chamber model. Clinical Oral Investigations. https://doi.org/10.1007/s00784-026-06761-7

Vancouver

da Silva ISP, de Toledo Stuani V, Bordini EAF, Cassiano FB, Bronze-Uhle ES, de Toledo PTA, et al. Decellularized bone matrix-enriched 3D-printed GelMA scaffold as a cell-homing platform: analysis using an artificial pulp chamber model. Clinical Oral Investigations. 2026. doi:10.1007/s00784-026-06761-7

BibTeX
@article{daSilva2026,
  author = {da Silva, Isabela Sanches Pompeo and de Toledo Stuani, Vitor and Bordini, Ester Alves Ferreira and Cassiano, Fernanda Balestrero and Bronze-Uhle, Erika Soares and de Toledo, Priscila Toninatto Alves and de Oliveira Fernandes, Lídia and Hebling, Josimeri and de Souza Costa, Carlos Alberto and Soares, Diana Gabriela},
  title = {Decellularized bone matrix-enriched 3D-printed GelMA scaffold as a cell-homing platform: analysis using an artificial pulp chamber model},
  journal = {Clinical Oral Investigations},
  year = {2026},
  doi = {10.1007/s00784-026-06761-7}
}
Kostenlos starten →