EUVIMEDEUVIMED entdecken
VergleichsstudieOpen Access · CC BY 4.0

Comparison of CAD/CAM and conventional microvascular free bone flaps in reconstructive head and neck surgery: a retrospective analysis of over 110 cases

Jonas Wüster, Pit Jacob Voss, Stella Magdalena Tunn, Julian Brauchle, Rainer Schmelzeisen, Marc Christian Metzger, Marc Anton Fuessinger, Leonard Simon Brandenburg

Clinical Oral Investigations · 2025

DOI: 10.1007/s00784-025-06573-1 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift Clinical Oral Investigations, 2025. Verfasst von Jonas Wüster und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Oral and Maxillofacial Surgery, Faculty of Medicine, Medical Center-University of Freiburg, University of Freiburg, Hugstetterstr. 55, …. Hauptthemen laut MEDLINE: Free Tissue Flaps, Computer-Aided Design, Plastic Surgery Procedures, Bone Transplantation. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universitätsklinikum Freiburg.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) – techniques are increasingly considered the gold standard for orofacial osseous reconstruction. By facilitating the harvesting and transfer of microvascular bone flaps, CAD/CAM offers potential advantages over conventional methods. Therefore, this study aimed to compare both methods in a large cohort. Materials and methods Patients who underwent conventional or CAD/CAM-planned osseous reconstruction with microvascular free flaps between 2000 and 2019 were included. Primary outcomes included osseous union, plate fracture, duration of intensive care (ICU) treatment, ischemic time, surgical time, oncological clearance and red blood cell transfusion requirements (RBT). Confounding factors influencing primary results were also analyzed. Statistical analyses were performed with a multivariate regression model; the level of significance was set to p = 0.050.

Results

A total of 112 patients were included, with 56 cases undergoing conventional reconstruction and 56 receiving CAD/CAM-assisted surgery. Patients in the CAD/CAM-group had significantly shorter ischemic times ( p = 0.007), with no disadvantages regarding resection margins ( p = 0.509). Nevertheless, reconstruction with scapula osteocutaneous free flaps (SOFF) and reconstruction with deep circumflex iliac artery grafts (DCIA) flaps showed a significant association ( p = 0.015 and p = 0.036 respectively) for red blood cell transfusion requirements when performed with CAD/CAM.

Conclusions

CAD/CAM-techniques reduce ischemic time in osseous reconstruction and show no disadvantages regarding clear margin resection. When performing complex reconstructions with chimeric SOFF using CAD/CAM-technique, longer ICU stay and prolonged surgical time was noticed. Furthermore, CAD/CAM-technique is associated with higher requirements for RBT when performing reconstructions with SOFF and DCIA flaps. Nevertheless, these results must be interpreted with caution, as the conventional group included younger patients (mean: 58.66 ± 9.15 years) than the CAD/CAM group (mean: 64.98 ± 10.41 years). Clinical relevance CAD/CAM-techniques reveal advantages, such as reduced ischemic time when compared to the conventional technique and enables extensive reconstructive surgery even for older patients. Nevertheless, due to the retrospective character with heterogeneous study groups, further research is highly recommended to evaluate long-term outcomes and further define the role of CAD/CAM in oncologic head and neck reconstruction.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Free Tissue FlapsComputer-Aided DesignPlastic Surgery ProceduresBone TransplantationHead and Neck NeoplasmsHumansRetrospective StudiesFemaleMaleMiddle AgedAgedAdultTreatment OutcomeOperative Time

Stichwörter der Autor:innen

CAD/CAMFree flapsHead and neck cancerOsseous reconstructionPatient specific implant

Autor:innen und Institutionen

  • Department of Oral and Maxillofacial Surgery, Faculty of Medicine, Medical Center-University of Freiburg, University of Freiburg, Hugstetterstr. 55, 79106, Freiburg, Germany. jonas.wuester@uniklinik-freiburg.de.
  • Department of Oral and Maxillofacial Surgery, Faculty of Medicine, Medical Center-University of Freiburg, University of Freiburg, Hugstetterstr. 55, 79106, Freiburg, Germany.
  • Institute of STEM Education, St. Gallen University of Teacher Education, St. Gallen, Switzerland.

Förderung

  • Universitätsklinikum Freiburg

Zitieren

APA

Wüster, J., Voss, P. J., Tunn, S. M., Brauchle, J., Schmelzeisen, R., Metzger, M. C., Fuessinger, M. A., & Brandenburg, L. S. (2025). Comparison of CAD/CAM and conventional microvascular free bone flaps in reconstructive head and neck surgery: a retrospective analysis of over 110 cases. Clinical Oral Investigations. https://doi.org/10.1007/s00784-025-06573-1

Vancouver

Wüster J, Voss PJ, Tunn SM, Brauchle J, Schmelzeisen R, Metzger MC, et al. Comparison of CAD/CAM and conventional microvascular free bone flaps in reconstructive head and neck surgery: a retrospective analysis of over 110 cases. Clinical Oral Investigations. 2025. doi:10.1007/s00784-025-06573-1

BibTeX
@article{Wster2025,
  author = {Wüster, Jonas and Voss, Pit Jacob and Tunn, Stella Magdalena and Brauchle, Julian and Schmelzeisen, Rainer and Metzger, Marc Christian and Fuessinger, Marc Anton and Brandenburg, Leonard Simon},
  title = {Comparison of CAD/CAM and conventional microvascular free bone flaps in reconstructive head and neck surgery: a retrospective analysis of over 110 cases},
  journal = {Clinical Oral Investigations},
  year = {2025},
  doi = {10.1007/s00784-025-06573-1}
}
Kostenlos starten →